WTB: Need 15g-Td04h
#1
Junior Member
Thread Starter
iTrader: (3)
Join Date: Apr 2008
Location: Fayetteville, NC
Posts: 50
Total Cats: 0
WTB: Need 15g-Td04h
I want to buy your GReddy 15g-tdo4h turbo and exhaust manifold. I'm willing to pay $375 for the turbo and $100 for the greddy manifold. If you have ETD manifold, I'd pay $250 and the shipping for it. Does anyone want to part out with theirs? Need it in a couple of weeks. Please no shaft play or oil leaks, or cracked manifolds. Thanks a lot! PM me.
#8
Junior Member
Thread Starter
iTrader: (3)
Join Date: Apr 2008
Location: Fayetteville, NC
Posts: 50
Total Cats: 0
I would like a smaller t3/t4 with an internal wastegate. A t3/t4 on a 1.6? I'm not looking for too much power, I just wanna replace my greddy because it's making this chirping, scraping sound.
#9
I'm Miserable!
iTrader: (16)
Join Date: Dec 2008
Location: where most people are Utarded
Posts: 1,296
Total Cats: 0
I have 2 t3's with a .42 compressor/.48 turbine, 1 with a .50 compressor/.48turbine, and another with a .60compressor/.48 turbine. Other options are single or dual-port actuator, and if you want the v-band turbine outlet? Do you already have the manifold and downpipe?
#10
Junior Member
Thread Starter
iTrader: (3)
Join Date: Apr 2008
Location: Fayetteville, NC
Posts: 50
Total Cats: 0
ok, so if I get the .42 compressor and .48 turbine, I would think that the turbo would spool faster in lower rpm's than say the .60 compressor and .48 turbine.
So how much for each trim with single port actuator without the v-band... I don't have the pipping, I guess the standard silicone couplets will do.
So how much for each trim with single port actuator without the v-band... I don't have the pipping, I guess the standard silicone couplets will do.
#11
I'm Miserable!
iTrader: (16)
Join Date: Dec 2008
Location: where most people are Utarded
Posts: 1,296
Total Cats: 0
On a 1.6 the .42/.48 will be plenty with the stock motor, what is your budget? And have you already purchased the manifold and downpipe from Begi? I have a new cast t3 manifold for a 1.6.
#12
Junior Member
Thread Starter
iTrader: (3)
Join Date: Apr 2008
Location: Fayetteville, NC
Posts: 50
Total Cats: 0
How much are you asking for? Because I really need a quick fix, I plan on getting the begi manifold and downpipe so that I will have less of an headache with fitment problems. That's why I orginally wanted the greddy kit turbo and manifold.
Thread
Thread Starter
Forum
Replies
Last Post
droptopgokart
Miata parts for sale/trade
6
05-16-2013 08:26 PM