When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.
WTBWanted to buy ads. Designated trademarks and brands are the property of their respective owners. forum cannot be held responsible for the outcome of any transactions.
I'm looking for a set of ITB's for either the normal NB (mk2) head or VVT (mk2.5) head.
Along the lines of the TechnoToyTuning kits or Jenveys, so billet adaptors and stuff. I don't like the thought of having any silicone parts holding it together.
Also interested in any naturally aspirated tuning parts too, aggressive cams, VVT cams, shim under buckets, springs etc etc.
Did y'all not get Silvertop/Blacktop 4AGE engines in Corollas over there? I just aquired a 90 Celica with a Silvertop swap and it is great. The ITB's scream at WOT. I searched EBay for some misc parts and a few listings did pop up just for the ITB assemblies. If I remember right the Blacktop engines had a slightly better ITB design than the Silvertop.
We did, and I can order something like the ones you linked me to, but I don't think things like the TechnoToyTuning billet adaptors are available anymore. Ideally I'd like a second hand kit.
I’ve got a silvertop setup. Technotoy manifold. Air horns. TPS. Linkage from battlegarage and uni filters. I ran this last year in my NB and recently purchased a TWM 50mm setup. I would like $1000 plus shipping.
I’ve got a silvertop setup. Technotoy manifold. Air horns. TPS. Linkage from battlegarage and uni filters. I ran this last year in my NB and recently purchased a TWM 50mm setup. I would like $1000 plus shipping.
I've got a N/A setup with 190hp at the flywheel (VD says 170whp)
45mm ITB's, aluminium velocity stacks, 290 degrees cam, 12:1 engine, shim under bucket with stiffer springs, gates racing timing belt, reroute, 4,7kg flywheel, engine with just 750km, 8000rpm redline, full 60mm exhaust: obx manifold, custom centre pipe and cobalt silencer (straight thru exhaust)
engine is based on a vvt block/oil pump/ reinforced strainer and a BP4W head
Nice
I bought a set and some materials to do the same thing on my Honda, but I dont think the throttles are big enough. Id like to find something over 50mm.
I’ve got a silvertop setup. Technotoy manifold. Air horns. TPS. Linkage from battlegarage and uni filters. I ran this last year in my NB and recently purchased a TWM 50mm setup. I would like $1000 plus shipping.