WTB Wanted to buy ads. Designated trademarks and brands are the property of their respective owners. forum cannot be held responsible for the outcome of any transactions.

WTB: 1.6L Cam Gear

Thread Tools
 
Search this Thread
 
Old 05-22-2009 | 06:24 PM
  #1  
yertnamreg1218's Avatar
Thread Starter
Junior Member
 
Joined: Aug 2007
Posts: 115
Total Cats: 0
Default WTB: 1.6L Cam Gear

I'm looking for one stock cam gear for a 1.6L, but would also be interested in two aftermarket cam gears that are priced correctly...

I had my cams out and one of them rolled off a bench. There are two hairline cracks in the one that fell, so it probably should be replaced. I've looked around and no one really has them.

I suppose I'd pay $20 for one of the stock ones shipped here. I can paypal or whatever.

Thanks a ton guys!
Old 05-22-2009 | 06:30 PM
  #2  
rharris19's Avatar
Elite Member
iTrader: (41)
 
Joined: Jan 2006
Posts: 2,417
Total Cats: 20
From: Seabrook, TX
Default

They probably need to know whether or not you need the intake or exhaust cam.
Old 05-22-2009 | 07:09 PM
  #3  
yertnamreg1218's Avatar
Thread Starter
Junior Member
 
Joined: Aug 2007
Posts: 115
Total Cats: 0
Default

Actually I believe they are the same. It just depends on how you mount them. There is a stub on the cam and you can align it so that it is set up for the exhaust or intake.
Old 05-22-2009 | 09:39 PM
  #4  
rharris19's Avatar
Elite Member
iTrader: (41)
 
Joined: Jan 2006
Posts: 2,417
Total Cats: 20
From: Seabrook, TX
Default



No. The intake has the spot for the CAS which makes it stick out further than the exhaust cam does. You need either an intake or an exhaust cam. Even then, if the were the same, and you needed the intake cam. Someone could send you another exhaust cam, you would be **** out of luck since it doesn't have the CAS spot.
Old 05-23-2009 | 12:28 AM
  #5  
miatanutz's Avatar
Senior Member
iTrader: (8)
 
Joined: Oct 2005
Posts: 766
Total Cats: 0
Default

Originally Posted by rharris19

No. The intake has the spot for the CAS which makes it stick out further than the exhaust cam does. You need either an intake or an exhaust cam. Even then, if the were the same, and you needed the intake cam. Someone could send you another exhaust cam, you would be **** out of luck since it doesn't have the CAS spot.
Read the OP. He asked for cam GEAR, not camshaft.

I have stock 1.6 cam gears. PM if interested
Old 05-23-2009 | 01:53 AM
  #6  
rharris19's Avatar
Elite Member
iTrader: (41)
 
Joined: Jan 2006
Posts: 2,417
Total Cats: 20
From: Seabrook, TX
Default

My bad. I'm a dumb ***. Forget what I have said
Old 05-26-2009 | 12:08 AM
  #7  
kww502's Avatar
Junior Member
iTrader: (3)
 
Joined: Mar 2009
Posts: 252
Total Cats: 3
From: Birmingham, AL
Default

have u found the cam gear yet I believe I have my stock ones in the attic and can check for them if u havent got one yet
Old 05-26-2009 | 01:06 AM
  #8  
Slydn-NA's Avatar
Newb
iTrader: (3)
 
Joined: Jan 2006
Posts: 30
Total Cats: 0
From: Old Bridge NJ
Default

I have both of them, 50.00 for both of them.
Old 05-29-2009 | 05:20 AM
  #9  
railz's Avatar
Bannisheded
iTrader: (33)
 
Joined: Jan 2009
Posts: 1,056
Total Cats: -3
From: San Jose, CA
Default

Got what you need.

$20 shipped, PM me.
Old 05-29-2009 | 10:02 AM
  #10  
gospeed81's Avatar
Elite Member
iTrader: (51)
 
Joined: Nov 2008
Posts: 7,257
Total Cats: 26
From: Spring, TX
Default

Where are you located????

If you are close I will give you whatever you need off my dead motor.
Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
Full_Tilt_Boogie
Build Threads
84
04-12-2021 05:21 PM
bigmackloud
Miata parts for sale/trade
19
01-08-2021 12:24 PM
Tony the Tiger
Miata parts for sale/trade
63
12-29-2016 03:23 AM
Frank_and_Beans
Supercharger Discussion
13
09-12-2016 09:17 PM




All times are GMT -4. The time now is 06:25 AM.