1.8 factory engine harness
#1
Junior Member
Thread Starter
iTrader: (7)
Join Date: Oct 2007
Location: Gainesville, FL
Posts: 87
Total Cats: 0
1.8 factory engine harness
My '99 has a 1.6 run by a Haltech, but I'm looking to put a 1.8 back in it and run it with just the OEM harness and ECU for the time being. The motor I'll be using is from an '01, so I'd like to find a complete, uncut harness that will work. Please let me know if you have a spare or where might be a good place to look for one, thanks!
#7
I have an '01 harness. There was one connector that wasn't being used (3 wires) from the previous owners parallel Motec install. I'm pretty sure it is for the CAS. If I pull the colors tonite I can tell you what the plug is for. The PO put a GM style plug on it but it was taped off. I can throw in the female end to that plug too since I have spares and pins for it. Everything else is intact.
Do you need an '01 ECU also? Got one.
Frank
Do you need an '01 ECU also? Got one.
Frank
Thread
Thread Starter
Forum
Replies
Last Post