When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.
Comments and discussion here very much appreciated but we will only use the data from the survey to determine what sizes get made next.
We'll begin accepting pre-orders for the new wheels in December. Get on our mailing list or follow us to get notified.
"Sanger" is an interesting choice for a rim/wheel name, it's slang in Australia for "Sandwich" :P
- I voted for it but still love the 6UL rim/wheel (15x8 6ULs on my car at the moment)
- looking forward to listing "Sangers" in my "modz" list!
What is the difference in these designs, is it just cosmetic or are weights, offsets etc particular to each?
... or have I missed something along the way?
The images are just examples of the designs. Strength to weight ratio doesn't vary much between the 3. But we can create any wheel size in any design. That's the point of the survey. Our focus isn't entirely on MX5 wheels. We're doing wheels for many other platforms, as we always have. But I thought I would drop the survey here just to check back in.
Any of those designs would look sweet on my CTS-V, but there's probably not enough demand to do 19's and it's not an option on the survey. I'm having a hard time finding wheels that I like in the size that I think I'd want though. It currently has a drag pack on it with 17x10 beadlocks in the rear and 18x8 up front lol.
Any of those designs would look sweet on my CTS-V, but there's probably not enough demand to do 19's and it's not an option on the survey. I'm having a hard time finding wheels that I like in the size that I think I'd want though. It currently has a drag pack on it with 17x10 beadlocks in the rear and 18x8 up front lol.
5x120mm bolt pattern.
19x9.5" ET45
19x10.5" ET45
19's are in the survey, but not Cadillac. I'd either choose Camaro (same PCD/offset) or email. No vote is no wheel.
I just zoomed in and figured out the difference between the 6UL and Coto design. Looks like the Coto would be most susceptible to curb damage, slightly less so the Sanger. The spokes look to be more flush than the original 6UL design. I won't say which I'm voting for and I'm usually careful with curbs but also park as far away from other cars, up against a curb so that also plays into my decision.
For the lay person, is there much difference in strength between the 6UL spokes attaching closer to the center of the rim barrel versus the Coto and Sanger mounted to the rim outer edge?
I just zoomed in and figured out the difference between the 6UL and Coto design. Looks like the Coto would be most susceptible to curb damage, slightly less so the Sanger. The spokes look to be more flush than the original 6UL design. I won't say which I'm voting for and I'm usually careful with curbs but also park as far away from other cars, up against a curb so that also plays into my decision.
For the lay person, is there much difference in strength between the 6UL spokes attaching closer to the center of the rim barrel versus the Coto and Sanger mounted to the rim outer edge?
Thanks!
No wheel we have ever made or will make, has spokes that protrude past the flange. Protruding spokes in wheel to wheel create carnage.
Coto is stiffer in some modes than 6UL but the differences are tiny. Like an order of magnitude smaller than the fatigue load cycle targets we set for every design. Like getting 57 mpg or 57.15mpg. The key differentiator is the that Coto has way more brake clearance than an equivalent 6UL without sacrificing weight or strength. Beyond that, the lip on the 6UL is only possible with medium to low offsets. With higher offsets, it requires that protruding spoke that we refuse to do. Even with high offsets, the Coto allows for some concavity that the 6UL loses. Note how much prettier the old Gen 4 15x8 +36 6UL was than the 17x8 +45 G4 6UL. Thus, our 15x7 & 15x8 4x100 wheels will be the 6UL design. The 15x9 will be a Coto so it clears our BX1175, which is impossible with the 6UL face. The 15x6 doesn't have enough room to put a lip on it so it will also be a Coto to retain a bit of concavity and keep the spokes tucked in.
The 6UL is still the most popular in our survey for two reasons: It has that exposed, uninterrupted lip that almost no other wheel features, and it's "comfort food" familiarity. The Coto is amazing in person and will gradually win people over, given time. S2000 owners want an ultra high offset 17x9 +53 in the 6UL and will complain about its lack of brake clearance. So it too, will be a Coto that will fit 355mm stoppers.
:
Coto is stiffer in some modes than 6UL but the differences are tiny. Like an order of magnitude smaller than the fatigue load cycle targets we set for every design. Like getting 57 mpg or 57.15mpg. The key differentiator is the that Coto has way more brake clearance than an equivalent 6UL without sacrificing weight or strength. Beyond that, the lip on the 6UL is only possible with medium to low offsets. With higher offsets, it requires that protruding spoke that we refuse to do. Even with high offsets, the Coto allows for some concavity that the 6UL loses. Note how much prettier the old Gen 4 15x8 +36 6UL was than the 17x8 +45 G4 6UL. Thus, our 15x7 & 15x8 4x100 wheels will be the 6UL design. The 15x9 will be a Coto so it clears our BX1175, which is impossible with the 6UL face. The 15x6 doesn't have enough room to put a lip on it so it will also be a Coto to retain a bit of concavity and keep the spokes tucked in.
The 6UL is still the most popular in our survey for two reasons: It has that exposed, uninterrupted lip that almost no other wheel features, and it's "comfort food" familiarity. The Coto is amazing in person and will gradually win people over, given time. S2000 owners want an ultra high offset 17x9 +53 in the 6UL and will complain about its lack of brake clearance. So it too, will be a Coto that will fit 355mm stoppers.
Based on this, it seems that producing 6ULs makes little sense over the Cotos, unless you get overwhelming support for the 6ULs which I doubt because they limit brake options, especially given that it took me a while to even notice the difference between the two and I have 15x8 6ULs on my car.
Based on this, it seems that producing 6ULs makes little sense over the Cotos, unless you get overwhelming support for the 6ULs which I doubt because they limit brake options, especially given that it took me a while to even notice the difference between the two and I have 15x8 6ULs on my car.
Big brake clearance is not really a concern for the 15X8. Very few people are trying to stuff 11.75 or 12" brakes in it. Clears our BX11 just fine. But for bigger brake clearance or higher offsets, the Coto is a more efficient design. For some generations of Mustang and earlier generations of BMW their lower offset can still work with big brakes and the 6UL face.
Apex offers an FL5 that has a nice lip like the 6UL. But they only offer it in certain low offset fitments. For other fitments they only offer their designs with spokes going to the outer flange like our Coto. Same deal.
But yes, ultimately the 6UL is a far less versatile design than the Coto.
5x130mm
19x9 ET50
and 19x11 ET60 or 19x12” ET63/65
Thanks! We're really making an effort to get into that market space. Most of the 911 fitments require their own tooling to make an properly optimized wheel for the platform. Not shared with Cayman/Spyder for the most part. In the past, we optimized for 5x114.3 pcd. Porsche stuff again, really requires it's own proprietary tooling to optimize the casting. So it's a big hurdle, but we're getting a lot of inquiries and developing a mailing list. We're hoping we can make it happen by Q2/23.
We have a network of racers, business associates and friends with pretty much every Porsche platform that have offered to let us make 3D scans of the wheels and gather data. The racers and shop owners provide invaluable data of the variability of each platform. You have fully stock builds then the HPDE, auto-x and racers that roll fenders, increase camber, stuff bigger tires in. That data allows us to develop fitments that work across the range of user profiles, from OEM+ to full race.
Share that survey link anywhere you think it'll reach the right audience.