What about a 500tq transmission?
#1
Senior Member
Thread Starter
iTrader: (2)
Join Date: Nov 2013
Location: Redlands, CA
Posts: 953
Total Cats: 41
![Default](https://www.miataturbo.net/images/icons/icon1.gif)
I realize I know little compared to many at this point, but I may be trying to tackle attaching a 300zx transmission to a BP as an engineering project. It would take time, since I have much to learn.
So far the basics I know that make this swap interesting:
1.) It'll do this,
So arguably good to around the 500tq or slightly beyond range with the weakest link being syncros going out at high power levels, but can be rebuilt relatively easily.
2.) Cheap, around the $300 mark for a good one.
3.) Gearing ratios are:1st 3.214
2nd 1.925
3rd 1.302
4th 1.000
5th 0.752
So far the basics I know that make this swap interesting:
1.) It'll do this,
So arguably good to around the 500tq or slightly beyond range with the weakest link being syncros going out at high power levels, but can be rebuilt relatively easily.
2.) Cheap, around the $300 mark for a good one.
3.) Gearing ratios are:1st 3.214
2nd 1.925
3rd 1.302
4th 1.000
5th 0.752
If anyone needs a refresh, that's similar 1-4 and a longer 5th gear. So,
Engine speed with Miata trans in 5th at 75mph with 4.1 diff: 3700rpm
Engine speed with z32 trans in 5th at 75mph with 4.1 diff: 3400rpm
4.) Possiblity of using miata hydraulics easily, both push style clutch.
5.) Relative length from bellhousing to shifter location is within 1" of each other, with OTS shift relocates available, normally for 240sx.
Issues:
1.) Input spline count is 24 vs miata 22
2.) 2 inch larger diameter clutch, so trans may be much too wide to work.
3.) Input Shaft Diameter:0.937 in. miata
Input Shaft Diameter:0.750 in. 300zx
4.) Found some forum post that the input shaft is 3" and 3/8" from tip to entering the snout on the trans. That's about all I could find online at the moment.
I've just been chatting with a company that makes adapters and it is possible but still have measuring of the hard stuff to do and adaptation of input shaft, spline count, clutch option and other more technical issues. Please let me know if we already know this is a terrible idea that's been tried before; I figured this forum would be a good place to ask for any specific measurements I may need in the future. As my miata may end up being a guinea pig for such a swap, fail or success, I'll share it here.
Engine speed with Miata trans in 5th at 75mph with 4.1 diff: 3700rpm
Engine speed with z32 trans in 5th at 75mph with 4.1 diff: 3400rpm
4.) Possiblity of using miata hydraulics easily, both push style clutch.
5.) Relative length from bellhousing to shifter location is within 1" of each other, with OTS shift relocates available, normally for 240sx.
Issues:
1.) Input spline count is 24 vs miata 22
2.) 2 inch larger diameter clutch, so trans may be much too wide to work.
3.) Input Shaft Diameter:0.937 in. miata
Input Shaft Diameter:0.750 in. 300zx
4.) Found some forum post that the input shaft is 3" and 3/8" from tip to entering the snout on the trans. That's about all I could find online at the moment.
I've just been chatting with a company that makes adapters and it is possible but still have measuring of the hard stuff to do and adaptation of input shaft, spline count, clutch option and other more technical issues. Please let me know if we already know this is a terrible idea that's been tried before; I figured this forum would be a good place to ask for any specific measurements I may need in the future. As my miata may end up being a guinea pig for such a swap, fail or success, I'll share it here.
#12
![Default](https://www.miataturbo.net/images/icons/icon1.gif)
don't search for the at least 2 giant threads we already have on retrofitting stronger transmissions or anything. there's more than that, but I can think of at least 2 off the top of my head ![wink](https://www.miataturbo.net/images/smilies/wink.gif)
These last two with actual research, measurements, progress, and plethora of really cool ideas.
Theres dozens of strong transmissions. Heck, likely hundreds. And only a handful are even remotely candidates for a miata fitment
![wink](https://www.miataturbo.net/images/smilies/wink.gif)
These last two with actual research, measurements, progress, and plethora of really cool ideas.
Theres dozens of strong transmissions. Heck, likely hundreds. And only a handful are even remotely candidates for a miata fitment
#13
Senior Member
Thread Starter
iTrader: (2)
Join Date: Nov 2013
Location: Redlands, CA
Posts: 953
Total Cats: 41
![Default](https://www.miataturbo.net/images/icons/icon1.gif)
don't search for the at least 2 giant threads we already have on retrofitting stronger transmissions or anything. there's more than that, but I can think of at least 2 off the top of my head ![wink](https://www.miataturbo.net/images/smilies/wink.gif)
These last two with actual research, measurements, progress, and plethora of really cool ideas.
Theres dozens of strong transmissions. Heck, likely hundreds. And only a handful are even remotely candidates for a miata fitment
![wink](https://www.miataturbo.net/images/smilies/wink.gif)
These last two with actual research, measurements, progress, and plethora of really cool ideas.
Theres dozens of strong transmissions. Heck, likely hundreds. And only a handful are even remotely candidates for a miata fitment
Inb4 more
![hatecat](https://www.miataturbo.net/images/smilies/hatecat.png)
#14
![Default](https://www.miataturbo.net/images/icons/icon1.gif)
like an LS swap, and like any other swap, the price of the engine/transmission is always the easiest/cheapest piece of the puzzle.
This isn't hatred. This is indifference and boredom. Cause we know this will go nowhere. You're like the 400th person to have this brilliant idea.
Here, have a +
This isn't hatred. This is indifference and boredom. Cause we know this will go nowhere. You're like the 400th person to have this brilliant idea.
Here, have a +
![likecat](https://www.miataturbo.net/images/smilies/likecat.png)
#17
Elite Member
iTrader: (15)
Join Date: Jan 2007
Location: Murfreesboro,TN
Posts: 2,068
Total Cats: 277
![Default](https://www.miataturbo.net/images/icons/icon1.gif)
Depends on what level of drifting your talking about. Many of the pro built cars rely on grip to carry the speeds and power to spin the tires. Even a spinning tire is creating a good of torque though the system.