Tip for those new to Carbotech pads
#1
Senior Member
Thread Starter
Join Date: Dec 2004
Location: Brisbane, Australia
Posts: 1,278
Total Cats: 37
![Default](https://www.miataturbo.net/images/icons/icon1.gif)
We fitted the Wilwood BBK with XP10's and put some XP8's on the rear sport brakes.
Spent ages wondering why the hell we couldn't get the XP8's to fit between the discs and calipers, it turns out you need to **** off the metal plate that is used on most other pads. The Carbotech backing plates appear to have provisions for it but with it installed they won't fit (too much meat on the pads).
It took us ages to figure this out, I thought we had a fucked caliper adjustment screw or something, but both calipers were the same. Hopefully this will save someone else out there some time.
Spent ages wondering why the hell we couldn't get the XP8's to fit between the discs and calipers, it turns out you need to **** off the metal plate that is used on most other pads. The Carbotech backing plates appear to have provisions for it but with it installed they won't fit (too much meat on the pads).
It took us ages to figure this out, I thought we had a fucked caliper adjustment screw or something, but both calipers were the same. Hopefully this will save someone else out there some time.
Thread
Thread Starter
Forum
Replies
Last Post
Jike Spingleton
Cars for sale/trade
3
09-20-2016 04:33 PM