View Poll Results: Which steering wheel?
Nardi Wood
![](https://www.miataturbo.net/mt2011/images_td/polls/bar2-l.gif)
![](https://www.miataturbo.net/mt2011/images_td/polls/bar2.gif)
![](https://www.miataturbo.net/mt2011/images_td/polls/bar2-r.gif)
![](https://www.miataturbo.net/clear.gif)
3
7.50%
Momo Retro
![](https://www.miataturbo.net/mt2011/images_td/polls/bar3-l.gif)
![](https://www.miataturbo.net/mt2011/images_td/polls/bar3.gif)
![](https://www.miataturbo.net/mt2011/images_td/polls/bar3-r.gif)
![](https://www.miataturbo.net/clear.gif)
37
92.50%
Voters: 40. You may not vote on this poll
Which steering wheel would you choose?
#42
Boost Czar
![](/mt2011/images_td/ranks/supporter1.gif)
![](/mt2011/images_td/ranks/admin.png)
iTrader: (62)
Join Date: May 2005
Location: Chantilly, VA
Posts: 79,688
Total Cats: 4,113
![Default](https://www.miataturbo.net/images/icons/icon1.gif)
you can, but isn't it easier to simply tie the wires together or wire in a resistor while you have the connector exposed?
you can also do it under the dash, where the blue/orange connector feeds into the steering wheel.
you can also do it under the dash, where the blue/orange connector feeds into the steering wheel.
#43
Senior Member
![](/mt2011/images_td/ranks/supporter1.gif)
iTrader: (8)
Join Date: Mar 2006
Location: Indianapolis, IN
Posts: 1,108
Total Cats: 232
![Default](https://www.miataturbo.net/images/icons/icon1.gif)
I am also using the cheap ebay hub ($15 shipped or something). Also, you can de-pin the blue connector so you don't have to cut the hub or anything, and tape up the 2 unused wires. I did not search for the resistor size needed, and am just living with the airbag light for now. It was already on b/c myairbag module was beeping incessantly and I had unplugged it.
#47
Senior Member
![](/mt2011/images_td/ranks/supporter1.gif)
iTrader: (8)
Join Date: Mar 2006
Location: Indianapolis, IN
Posts: 1,108
Total Cats: 232
![Default](https://www.miataturbo.net/images/icons/icon1.gif)
![wink](https://www.miataturbo.net/images/smilies/wink.gif)
#51
![Default](https://www.miataturbo.net/images/icons/icon1.gif)
What is the general consensus on D cut wheels? I've heard pretty much nothing but bad things about them. For a Miata it seems like they'd make the most sense, clearing up a bunch of leg room below the wheel. I've noticed them popping up on several vehicles from the factory as well.
I think of all the wheels here, Brain's $25 wheel + hub seems the best option for me. I just cant get past the size...320mm seems extremely small.
I think of all the wheels here, Brain's $25 wheel + hub seems the best option for me. I just cant get past the size...320mm seems extremely small.
#54
Senior Member
![](/mt2011/images_td/ranks/supporter1.gif)
iTrader: (8)
Join Date: Mar 2006
Location: Indianapolis, IN
Posts: 1,108
Total Cats: 232
![Default](https://www.miataturbo.net/images/icons/icon1.gif)
You can't smoothly slide your hands around a d-cut wheel. It may be more comfortable when traveling in a straight line, but I think it could be downright dangerous when you need to react quickly because the shape your hands feel will not be constant. You can gain leg/ knee clearance by 1) choosing a smaller diameter wheel or 2) do a foamectomy to lower you in the seat or 3) buy different seats that are lower to the floor. Between the foamectomy and the 10mm smaller radius (20mm smaller diameter) wheel, I now have about 3/4" an inch more clearance than I did with the stock seat and steering wheel.
#55
![Default](https://www.miataturbo.net/images/icons/icon1.gif)
__________________
Best Car Insurance | Auto Protection Today | FREE Trade-In Quote
#56
Senior Member
![](/mt2011/images_td/ranks/supporter1.gif)
iTrader: (8)
Join Date: Mar 2006
Location: Indianapolis, IN
Posts: 1,108
Total Cats: 232
![Default](https://www.miataturbo.net/images/icons/icon1.gif)
You can't smoothly slide your hands around a d-cut wheel. It may be more comfortable when traveling in a straight line, but I think it could be downright dangerous when you need to react quickly because the shape your hands feel will not be constant. You can gain leg/ knee clearance by 1) choosing a smaller diameter wheel or 2) do a foamectomy to lower you in the seat or 3) buy different seats that are lower to the floor. Between the foamectomy and the 10mm smaller radius (20mm smaller diameter) wheel, I now have about 3/4" an inch more clearance than I did with the stock seat and steering wheel.
#58
Boost Czar
![](/mt2011/images_td/ranks/supporter1.gif)
![](/mt2011/images_td/ranks/admin.png)
iTrader: (62)
Join Date: May 2005
Location: Chantilly, VA
Posts: 79,688
Total Cats: 4,113
![Default](https://www.miataturbo.net/images/icons/icon1.gif)
I'm at 340mm, i wouldn't mind smaller... It's only 1.18" less diameter than stock...that's like a pinky finger segment on each side.
you should see pschmit's wheel. I think it's like 290mm or something crazy.
#59
Senior Member
![](/mt2011/images_td/ranks/supporter1.gif)
iTrader: (8)
Join Date: Mar 2006
Location: Indianapolis, IN
Posts: 1,108
Total Cats: 232
![Default](https://www.miataturbo.net/images/icons/icon1.gif)
Name some of these many cars for me. I admit I have let my subscriptions to the new car mags lapse over the years, but I haven't seen a single new car that piqued my interest that has a D cut wheel. If my first reply to your questioned seemed harsh, I apologize, but I am of the "Mod for a purpose" school of thought. And that purpose in my cars almost always is Performance, and a D-cut wheel offers no performance gains, and likely a disadvantage, IMO.