No caster?
#1
Junior Member
Thread Starter
iTrader: (2)
Join Date: Aug 2008
Location: Mobile,AL
Posts: 203
Total Cats: 0
No caster?
Well, I finally got around to replacing all the control arm bushings. Now I can't seem to get any caster during my alignment. I've triple checked everything, does anybody know what could cause this?
I keep thinking either I missed something silly or my alignment computer is off some how. Before I changed all the bushings I could get at least 6.0 degrees (probably last year some time), now I could actually set it to zero. The most I can get is 3.0 which isn't even in the ballpark of what I want.
I keep thinking either I missed something silly or my alignment computer is off some how. Before I changed all the bushings I could get at least 6.0 degrees (probably last year some time), now I could actually set it to zero. The most I can get is 3.0 which isn't even in the ballpark of what I want.
Thread
Thread Starter
Forum
Replies
Last Post
Minty
Suspension, Brakes, Drivetrain
14
03-10-2015 12:37 PM