Chubs are in production for the NC and ND. Due here around March-April 2025

Pre order special during now and through or Orange November sale
https://www.949racing.com/orange-november-sale/

Same synthetic grease and grade 10 bearings as our NA/NB hubs. Includes Supermiata extended ball tip 12.9 grade studs.
ND Front and rear are OEM replicas but with 11mm forged billet flanges.
NC front is a hybrid of the much larger S1 RX8 bearing shell but with the NC sensor package. The hot set up in the past was the S2 RX8 hub which was about the same size as the NC hub and PNP with the NC ABS.
We'll have pics later on but if you have ever seen an original S1 RX8 hub, they are way beefier than the NC or S2 RX8. The geometry was the same as NC they just had the wrong ABS plug. So we made S1 RX8 hubs with an even thicker forged flange and NC ABS tone ring and plug. Voila!

NC / S2 RX8 front

NC Rear

ND Front


ND Rear

 

Running on a set of RX8 front hubs right now but I'll be picking up a set of these next season!

Running S2 RX8 fronts on my car because that's all that can be found currently(?) I couldn't find a set of S1's anywhere but the S2 hub barrel was still larger than the NC one so I figured it was an improvement. Stoked you guys have a better option.

 

S1 hubs don't have the right plug for the ABS harness. If you run w/o ABS, they'll actually fit the car. That's what gave me the idea for the hybrid.

 

Yup the S2 is a slightly larger shell than the NC, but the S1 is quite a lot larger, it just doesn't work with the ABS sensor.