Metal salad in my 5-speed, MLV and sound.
#4
![Default](https://www.miataturbo.net/images/icons/icon1.gif)
god damn it....and here I'm aiming for mid 300's very soon![facepalm](https://www.miataturbo.net/images/smilies/facepalm.gif)
regarding 6 speeds: I'm pretty sure they are capable of holding a bit more than the 5 sp, simply due to the fact that the gears are shorter and closer, as well as having a more rigid bellhousing allowing for less flex, and less torque load going from gear to gear. just my uneducated guess.
![facepalm](https://www.miataturbo.net/images/smilies/facepalm.gif)
regarding 6 speeds: I'm pretty sure they are capable of holding a bit more than the 5 sp, simply due to the fact that the gears are shorter and closer, as well as having a more rigid bellhousing allowing for less flex, and less torque load going from gear to gear. just my uneducated guess.
#8
![Default](https://www.miataturbo.net/images/icons/icon1.gif)
__________________
Best Car Insurance | Auto Protection Today | FREE Trade-In Quote
#11
Senior Member
![](/mt2011/images_td/ranks/supporter1.gif)
iTrader: (8)
Join Date: Mar 2006
Location: Indianapolis, IN
Posts: 1,108
Total Cats: 232
![Default](https://www.miataturbo.net/images/icons/icon1.gif)
What's the write-up for this R&R?
- Drain gearbox
- Remove speedo cable and wiring clips
- Unbolt PPF and move it to the side
- Unbolt drive shaft and move aside
- Tilt engine slightly backwards
- Unbolt range of 14 and 17mm bolts, including starter
- Remove?
Missing something?
- Drain gearbox
- Remove speedo cable and wiring clips
- Unbolt PPF and move it to the side
- Unbolt drive shaft and move aside
- Tilt engine slightly backwards
- Unbolt range of 14 and 17mm bolts, including starter
- Remove?
Missing something?
![wink](https://www.miataturbo.net/images/smilies/wink.gif)
#13
![Default](https://www.miataturbo.net/images/icons/icon1.gif)
- Lift car up HIGH
- Remove shifter as a whole
- Remove cat back
- Drain gearbox
- Remove speedo cable and wiring clips
- Unbolt PPF and move it to the side
- Unbolt drive shaft and move aside
- Tilt engine slightly backwards
- Unbolt range of 14 and 17mm bolts, including starter
- Remove?
- Remove shifter as a whole
- Remove cat back
- Drain gearbox
- Remove speedo cable and wiring clips
- Unbolt PPF and move it to the side
- Unbolt drive shaft and move aside
- Tilt engine slightly backwards
- Unbolt range of 14 and 17mm bolts, including starter
- Remove?
#16
![Default](https://www.miataturbo.net/images/icons/icon1.gif)
http://www.toysport.com/catalog/PET%...Conversion.htm
buy Bell Housing from there "S-RWD W or T bellhousing"
buy W58 supra tranny
buy 3SGTE adapter plate from me
enlarge your tunnel, make some mounts and a custom driveshaft
profit?
buy Bell Housing from there "S-RWD W or T bellhousing"
buy W58 supra tranny
buy 3SGTE adapter plate from me
enlarge your tunnel, make some mounts and a custom driveshaft
profit?
#17
Tour de Franzia
![](/mt2011/images_td/ranks/supporter1.gif)
iTrader: (6)
Join Date: Jun 2006
Location: Republic of Dallas
Posts: 29,085
Total Cats: 375
![Default](https://www.miataturbo.net/images/icons/icon1.gif)
Quaife sucks because I bought a $900 differential from them, had a pro install it for $500...then one of the first times I ran the car on the freeway in 4th gear at 480whp the diff's case broke. I called quaife and those ******s told me they would only warranty the internal gears, not the case and they'd sell me another one at a reduced priced.
I told them to eat my **** on toast and Gary Peloquin chimed in and cut me a deal on his differentaial that was fine in my car and my friend's 900whp car. I wish he'd made differentials for us...time for me to call.
It will be a cold day in hell before I give Quaife a god damn red cent.
I told them to eat my **** on toast and Gary Peloquin chimed in and cut me a deal on his differentaial that was fine in my car and my friend's 900whp car. I wish he'd made differentials for us...time for me to call.
It will be a cold day in hell before I give Quaife a god damn red cent.
#18
![Default](https://www.miataturbo.net/images/icons/icon1.gif)
Quaife sucks because I bought a $900 differential from them, had a pro install it for $500...then one of the first times I ran the car on the freeway in 4th gear at 480whp the diff's case broke. I called quaife and those ******s told me they would only warranty the internal gears, not the case and they'd sell me another one at a reduced priced.
I told them to eat my **** on toast and Gary Peloquin chimed in and cut me a deal on his differentaial that was fine in my car and my friend's 900whp car. I wish he'd made differentials for us...time for me to call.
It will be a cold day in hell before I give Quaife a god damn red cent.
I told them to eat my **** on toast and Gary Peloquin chimed in and cut me a deal on his differentaial that was fine in my car and my friend's 900whp car. I wish he'd made differentials for us...time for me to call.
It will be a cold day in hell before I give Quaife a god damn red cent.
Peloquin > Quaife. I have never heard one bad thing about Peloquin and they are cheaper with a better warranty!
#19
Tour de Franzia
![](/mt2011/images_td/ranks/supporter1.gif)
iTrader: (6)
Join Date: Jun 2006
Location: Republic of Dallas
Posts: 29,085
Total Cats: 375
![Default](https://www.miataturbo.net/images/icons/icon1.gif)
Peloquin offers a "no questions asked" warranty and apparently no one has ever broken one. I want him to make diffs for us but not sure if the planetary diff works as well as a clutch diff.