highest HP with 6 spd.
#21
![Default](https://www.miataturbo.net/images/icons/icon1.gif)
Rumor? Get fucked. I broke one at 219whp/201wtq. Just because you haven't broken one doesn't suddenly make every other case invalid. People routinely break the 5-speed at around 250whp, and sometimes less.
The only rumors are the ones you spread. The 5-speed is not reliable at 350whp - period.
The only rumors are the ones you spread. The 5-speed is not reliable at 350whp - period.
#22
Elite Member
iTrader: (13)
Join Date: Dec 2006
Location: Taos, New mexico
Posts: 6,763
Total Cats: 631
![Default](https://www.miataturbo.net/images/icons/icon1.gif)
Ill step in. One of my best friends just blew the tranny on his sub 250whp car. Ak47bravo on this forum, he wasnt even beating on the car when it went out, and his car is only around 220-230whp. Maybe less.
I know i dont expect mine to last too long.
I know i dont expect mine to last too long.
#23
Former Vendor
![](/mt2011/images_td/ranks/supporter1.gif)
iTrader: (31)
Join Date: Nov 2006
Location: Sunnyvale, CA
Posts: 15,442
Total Cats: 2,103
![Default](https://www.miataturbo.net/images/icons/icon1.gif)
One:
Two:
Three and four:
Five:
Six:
Took me about 20 minutes. They aren't bulletproof at 350whp. Stop spreading shitty rumors.
I recently munched a 5 speed that has been whining for the last 3 years. I'm in the low 200s power wise for the last 3 months, but most of it's life was around 160ish. I prefer 6 pucks and tracked/drifted it at least twice a month.
I haven't taken it apart and probably won't but it got me home sounding like death.
I haven't taken it apart and probably won't but it got me home sounding like death.
I have been through 2 tranny's and about to blow up my 3rd. I just keep buying 5-speeds for like $300 and pop and say screw it. I can't afford to buy a $2000 gear set. I would buy a 6speed but would need to get a 3.63 or wheatever the rear end close to that would be, but once again $$$. and with 270whp and 250ft. lbs I know I am gonna break plenty more.
After destroying my 5speed and putting in a 6speed I still have the 4.10 gears but I have a new 3.63gearset and Torsen diff sitting in my garage just waiting for my ACPT carbon fiber driveshaft to show up and I can put them all in together. The 3.63 should be much nicer on the freeway, although 80-130mph is quite a Hoot right now! Ask Bryce.![](https://www.miataturbo.net/images/smilies/smile.gif)
![](https://www.miataturbo.net/images/smilies/smile.gif)
Took me about 20 minutes. They aren't bulletproof at 350whp. Stop spreading shitty rumors.
#24
![Default](https://www.miataturbo.net/images/icons/icon1.gif)
So you are one less than I have seen not grenade still. And I'm not using the internet to find them, either. I could find alot more if I felt like taking the time. For all the people who broke their 5-spd and posted about it, there are gonna be more who are maing that on the 5-spd and not breaking them. Maybe I should start a thread saying, "250whp+ on stock 5-spd?" and see how many post up. Properly driven and properly maintianed 5-spds will handle 350whp. Maybe people should pony up for some Motul fluids instead of whatever they get at Autozone?
#26
![Default](https://www.miataturbo.net/images/icons/icon1.gif)
Originally Posted by FoundSoul
I'm not sure what the whtq tranny threshold is, but we totally ate 2nd gear in mine earlier this year. It exploded on the AutoX course while on a steady accell pull in 2nd. 232wtq and sticky tires will do it for sure.
I'm not sure what the whtq tranny threshold is, but we totally ate 2nd gear in mine earlier this year. It exploded on the AutoX course while on a steady accell pull in 2nd. 232wtq and sticky tires will do it for sure.
Jerry Hoffman had 2nd gear fail on a simple 2nd-gear acceleration pull during an autocross at 235tq.
I have a friend who did the same thing at less than 200whp
Originally Posted by BenR
I recently munched a 5 speed that has been whining for the last 3 years. I'm in the low 200s power wise for the last 3 months, but most of it's life was around 160ish. I prefer 6 pucks and tracked/drifted it at least twice a month.
I haven't taken it apart and probably won't but it got me home sounding like death.
I recently munched a 5 speed that has been whining for the last 3 years. I'm in the low 200s power wise for the last 3 months, but most of it's life was around 160ish. I prefer 6 pucks and tracked/drifted it at least twice a month.
I haven't taken it apart and probably won't but it got me home sounding like death.
So we have 8 people for both of us. Hopefully Matt will get a tally in here, since he has grenaded a 5-spd. That will go in as the tie-breaker as it sits right now. I posted a thread on M.net and CR.net. Let the evidence speak for itself.
Maybe you'll start a thread here? These are your morons on this site, right?
#27
Elite Member
iTrader: (1)
Join Date: Feb 2008
Location: Birmingham Alabama
Posts: 7,930
Total Cats: 45
![Default](https://www.miataturbo.net/images/icons/icon1.gif)
Dude, wtf. Just because you have seen 8 that havent doesnt mean they dont break, that just means those 8 havent broken yet. What a tard... I havent seen rain in 8 days, it must not rain. Oh, you've seen 8 days it has, well Im sorry, your wrong, I havent seen rain, it doesnt happen obviously...
#30
![Default](https://www.miataturbo.net/images/icons/icon1.gif)
Ray - why dont you start that thread you mentioned...I really dont see many 5 speeds lasting long past 250whp. You realize you are almost tripling the power/torque that the car comes with from the factory right? I'd be curious to see results of that thread
#31
Elite Member
iTrader: (1)
Join Date: Feb 2008
Location: Birmingham Alabama
Posts: 7,930
Total Cats: 45
![Default](https://www.miataturbo.net/images/icons/icon1.gif)
Which as Ive already stated is why Im staying at sub 200whp until 6 speed time. I want to take no chances in being stranded, its no fun. I broke down 4 times on the way home with one of my RX7's, on a 250 mile trip. NOT FUN being stuck away from home. Id rather not blow up a trans in the middle of downtown Birmingham and get my *** shot at 2am on the way home from work on the dangerous side of town...
#32
![Default](https://www.miataturbo.net/images/icons/icon1.gif)
ray_sir_6,
While I had a 200+whp NA for quite some time and never broker a trans, there were plenty of guys in the early days of the FMIIs that broke trans on the miatapower mailing list. This list pre-dated the M.net forum.
Like any other trans, the Miata 5 speed will certainly last longer with some mechanical empathy, but pure power can certainly break them.
I also had an '04 Subaru FXT with the 5 speed. They're known as glass transmissions and people break them all the time with minor bolt-on mods. I put down 411 whp and didn't break the trans. A month after I sold the car, the guy who bought it broke the trans. He claimed that he wasn't banging gears and I have no reason to doubt him. He wasn't trying to get me to pony up for a replacement or anything, and he had plans to go with a built trans anyway.
Frank
While I had a 200+whp NA for quite some time and never broker a trans, there were plenty of guys in the early days of the FMIIs that broke trans on the miatapower mailing list. This list pre-dated the M.net forum.
Like any other trans, the Miata 5 speed will certainly last longer with some mechanical empathy, but pure power can certainly break them.
I also had an '04 Subaru FXT with the 5 speed. They're known as glass transmissions and people break them all the time with minor bolt-on mods. I put down 411 whp and didn't break the trans. A month after I sold the car, the guy who bought it broke the trans. He claimed that he wasn't banging gears and I have no reason to doubt him. He wasn't trying to get me to pony up for a replacement or anything, and he had plans to go with a built trans anyway.
Frank
#33
Tour de Franzia
![](/mt2011/images_td/ranks/supporter1.gif)
iTrader: (6)
Join Date: Jun 2006
Location: Republic of Dallas
Posts: 29,085
Total Cats: 375
![Default](https://www.miataturbo.net/images/icons/icon1.gif)
I have read into it. 350whp is the safe limit. I read and go on personal experience. We had the stock 5-spd on the 480whp 1.8l, never had an issue. Keith Verges' cars are making 275whp with a FMII kit, Hydra ECU, and all run stock 5-spds. NEVER had a tranny fail. They make close to 250tq as well.
List of people I know who've blown up transmissions at 220whp+ in dallas:
Gary S
Mike (silver miata)
Cliff (black miata)
Keith Verges' buddy with the yellow car
the ATS car
#34
Tour de Franzia
![](/mt2011/images_td/ranks/supporter1.gif)
iTrader: (6)
Join Date: Jun 2006
Location: Republic of Dallas
Posts: 29,085
Total Cats: 375
![Default](https://www.miataturbo.net/images/icons/icon1.gif)
oh, and a lot of you ------s have aids. Want to blow your trans up? Put 230whp through it for a few days.
I know I'm not going to drive from Dallas, track my 5-speed all day long in Tulsa, and expect it to get me home. I will however, expect to get laid every day of my life because I'm the **** and everybody wants to be me.
I know I'm not going to drive from Dallas, track my 5-speed all day long in Tulsa, and expect it to get me home. I will however, expect to get laid every day of my life because I'm the **** and everybody wants to be me.
#35
![Default](https://www.miataturbo.net/images/icons/icon1.gif)
Right. You keep thinking that. Can you find me 6 more cars that have between 200 and 250whp that have broken trannies? I have posted 8 examples that I have PERSONALLY seen. 7 SM-T cars, and one that was a friend's who worked here when I was just a customer. To use your own statement against you, "Just cause YOUR tranny breaks at 219whp/201tq doesn't mean that's the norm, and the 5-spds are gonna break at 250whp." Who are these people who have "routinely" broken their trannies at 250whp? Anyone wanna e-mail Matt? I know he broke his 5-spd before he did his Quaife gearset. What whp level was he at? Well, he never says whp, he always uses tq when discussing his power levels, so someone ask him. I have his email, but if I ask, I know everyone will call BS when I post it up. I'm pretty sure he was over 300tq, but I'm not 100%. So someone, find out, and post your findings.
Matt had broken at least two 5 speeds before the quaife.
#36
Tour de Franzia
![](/mt2011/images_td/ranks/supporter1.gif)
iTrader: (6)
Join Date: Jun 2006
Location: Republic of Dallas
Posts: 29,085
Total Cats: 375
![Default](https://www.miataturbo.net/images/icons/icon1.gif)
My car made 261/252...I expect it to blow up the 5-speed in a few weeks or a month, not the first time I roll into boost.
I think matt has better things to do with his time than argue on the internet.
I think matt has better things to do with his time than argue on the internet.
#37
![Default](https://www.miataturbo.net/images/icons/icon1.gif)
Dude, wtf. Just because you have seen 8 that havent doesnt mean they dont break, that just means those 8 havent broken yet. What a tard... I havent seen rain in 8 days, it must not rain. Oh, you've seen 8 days it has, well Im sorry, your wrong, I havent seen rain, it doesnt happen obviously...
Ditto.
Keith Verges is putting down 230whp "for reliability." Everyone blows them up at 250whp. He's had trans death, talk to him about it...I did.
List of people I know who've blown up transmissions at 220whp+ in dallas:
Gary S
Mike (silver miata)
Cliff (black miata)
Keith Verges' buddy with the yellow car
the ATS car
List of people I know who've blown up transmissions at 220whp+ in dallas:
Gary S
Mike (silver miata)
Cliff (black miata)
Keith Verges' buddy with the yellow car
the ATS car
YouTube - Corvette Chases Miata at MSR
That Vette is making north of 400whp...yet can't catch a 225whp Miata on the straights? You want to see what a car with similar power-to-weight does to a 225whp Miata (mine makes 223whp, so can't get much closer)? How about a 500whp Evo?
YouTube - Miata @ MSR Cresson Part 2
It's not that hard to tell using VISUAL EVIDENCE that they make WAY MORE THAN 225whp. Just something to think about.
I haven't heard of Keith or his buddy (I'm bad with names, but he has the white Evo) breaking trannies, but they go thru alot of motors.
oh, and a lot of you ------s have aids. Want to blow your trans up? Put 230whp through it for a few days.
I know I'm not going to drive from Dallas, track my 5-speed all day long in Tulsa, and expect it to get me home. I will however, expect to get laid every day of my life because I'm the **** and everybody wants to be me.
I know I'm not going to drive from Dallas, track my 5-speed all day long in Tulsa, and expect it to get me home. I will however, expect to get laid every day of my life because I'm the **** and everybody wants to be me.
Again, for those that just scanned to the bottom rather than read everything.....
<cliff notes> I'm being proven wrong. I'm not above being wrong. </cliff notes>
#38
![Default](https://www.miataturbo.net/images/icons/icon1.gif)
I thought I read somewhere he was close to 300tq, but I can't find it anywhere. I only read about the one that broke when he still set the RWD track record, the event before he got the Quaife put in for Utah.
#39
Junior Member
Thread Starter
iTrader: (1)
Join Date: Jan 2009
Location: south FL
Posts: 215
Total Cats: 0
![Default](https://www.miataturbo.net/images/icons/icon1.gif)
ladies...LADIES!
you sure know how to **** on someone's thread...you sound like a bunch of bitches in a cat fight.
two pages of broken 5 spd. trannies.
in case you missed it, the question AGAIN was...How high HP wise can a 6 spd. be taken before it breaks.
i suppose i'll find out first hand.
i thought more of you had 6 speeds, i was mistaken.
you sure know how to **** on someone's thread...you sound like a bunch of bitches in a cat fight.
two pages of broken 5 spd. trannies.
in case you missed it, the question AGAIN was...How high HP wise can a 6 spd. be taken before it breaks.
i suppose i'll find out first hand.
i thought more of you had 6 speeds, i was mistaken.
#40
![Default](https://www.miataturbo.net/images/icons/icon1.gif)
Robino,
There aren't a ton of guys here making over 300hp. Not a lot have built bottom ends. Some, but not most. There have been a handful of guys that built 400+hp cars. JayL, 1badmx5 and I'm sure a few others. 6 spds are pretty much accepted as the way to go. 6 spds have failed but it is the exception not the rule. It seems that the 6 spd can take just about whatever the limits are of the BP engine unless it's some crazy 700hp build. Those guys then use the 3rd gen RX7 tranny it seems.
For the catfighting here's my take. Raysir6 is claiming 5 spds are fine since he hasn't seen any break. EVERYONE else says they are iffy once you get over 200hp and very iffy over 250. They don't all break. That's obvious. That the odds of breaking are much higher is generally accepted. There's a difference between will break and could break. Not all will. All could. It's a matter of odds and chance more than absolutes.
There aren't a ton of guys here making over 300hp. Not a lot have built bottom ends. Some, but not most. There have been a handful of guys that built 400+hp cars. JayL, 1badmx5 and I'm sure a few others. 6 spds are pretty much accepted as the way to go. 6 spds have failed but it is the exception not the rule. It seems that the 6 spd can take just about whatever the limits are of the BP engine unless it's some crazy 700hp build. Those guys then use the 3rd gen RX7 tranny it seems.
For the catfighting here's my take. Raysir6 is claiming 5 spds are fine since he hasn't seen any break. EVERYONE else says they are iffy once you get over 200hp and very iffy over 250. They don't all break. That's obvious. That the odds of breaking are much higher is generally accepted. There's a difference between will break and could break. Not all will. All could. It's a matter of odds and chance more than absolutes.