Help me pick a clutch?
#1
Junior Member
Thread Starter
Join Date: May 2011
Location: Signal Hill, CA
Posts: 257
Total Cats: 13
Help me pick a clutch?
Hey Guys,
I need to replace my dying clutch; I've been researching and reading for a few days and here are my choices:
The car isn't a dedicated track car, but it's not my daily driver. I drive it to autox events and occasional weekend morning drives. Would love a friendlier clutch for crazy LA traffic (aka I'm a puss).
xoxo,
-one lane
I need to replace my dying clutch; I've been researching and reading for a few days and here are my choices:
- Flyin Miata Stage 1 w/ 13.45lb flywheel (318 ft/lb)
- Trackspeed 1.6 ACT XT Street Kit w/ stock flywheel (270 ft/lb)
- 949Racing 1.6 Organic kit w/ stock flywheel (220 ft/lb) - Is this enough?
The car isn't a dedicated track car, but it's not my daily driver. I drive it to autox events and occasional weekend morning drives. Would love a friendlier clutch for crazy LA traffic (aka I'm a puss).
- Which would you pick and why?
- Any other clutch/flywheel combo recommendation?
xoxo,
-one lane
#2
mkturbo.com
iTrader: (24)
Join Date: May 2006
Location: Charleston SC
Posts: 15,194
Total Cats: 1,687
FM1 is the only clutch you need to buy. They hold more power then the ACT, are cheaper, and have better pedal feel. I have not had a chance to try the new 949 clutches so I can't really comment on them, but knowing you are already close to their torque limit would scare me.
#4
Junior Member
Thread Starter
Join Date: May 2011
Location: Signal Hill, CA
Posts: 257
Total Cats: 13
FM1 is the only clutch you need to buy. They hold more power then the ACT, are cheaper, and have better pedal feel. I have not had a chance to try the new 949 clutches so I can't really comment on them, but knowing you are already close to their torque limit would scare me.
I didn't even consider that. That would put me around 250 tq at the crank (assuming 15% loss). Thanks for the heads up.
#8
Elite Member
iTrader: (2)
Join Date: Aug 2016
Location: New Fucking Jersey
Posts: 3,890
Total Cats: 143
Side note: I've read that the stock fw might be helpful when really pushing a bunch of power because of the higher inertia and less jolting transfer of momentum.
#9
I love light flywheels. 1.6l extreme with organic disk and a 7.8 lb 1.6l 949 or Fidanza flywheel feels like butter to me in a CSP car I'm building. also note the 1.6l clutch is a few pounds lighter and lower MOI than a 1.8l. it would not bother me at all on the street driven daily.
In my beast with over 300 ft-lbs Im running the same 1.6l XT with a 4 puck. It also has served me well and It is also not terrible to modulate. The clutch works fine but transmissions Hate that much torque though.
In my beast with over 300 ft-lbs Im running the same 1.6l XT with a 4 puck. It also has served me well and It is also not terrible to modulate. The clutch works fine but transmissions Hate that much torque though.
#10
mkturbo.com
iTrader: (24)
Join Date: May 2006
Location: Charleston SC
Posts: 15,194
Total Cats: 1,687
They prefer the feel of it maybe? I don't really know why they recommend it, as I am not them. Tons of people like lightweight flywheels. I personally don't. I have one of their combo's in my NB and it is just meh. Not sure how to describe it.
Some people say that. I think for the vast majority of people it is not an issue.
Some people say that. I think for the vast majority of people it is not an issue.
Last edited by shuiend; 12-14-2016 at 08:03 AM.
#11
SadFab CEO
iTrader: (3)
Join Date: Sep 2012
Location: your mom's house phoenix, AZ
Posts: 4,560
Total Cats: 1,142
One of the best mods to my Miata was removing half the weight from the flywheel. Track only, DD or whatever, lightweight FW is awesome. Stock FW lovers are pussies and should have their boost taken away..... ****
#14
I'm leaning towards the FM setup because I've never had a lightened flywheel before and the next step up in 949's 1.6 kits is sold out. Did you run the 10lb or 13lb flywheel with the FM1 kit?
I didn't even consider that. That would put me around 250 tq at the crank (assuming 15% loss). Thanks for the heads up.
I didn't even consider that. That would put me around 250 tq at the crank (assuming 15% loss). Thanks for the heads up.
#16
Cpt. Slow
iTrader: (25)
Join Date: Oct 2005
Location: Oregon City, OR
Posts: 14,443
Total Cats: 1,216
I've driven 949's original 1.6 organic and the new 1.6 hybrid. They're both extremely streetable, wouldn't hesitate to put either in a daily driver. That being said, I can't seem to find the hybrid version on 949's site anymore.
#19
Elite Member
iTrader: (2)
Join Date: Aug 2016
Location: New Fucking Jersey
Posts: 3,890
Total Cats: 143
I love light flywheels. 1.6l extreme with organic disk and a 7.8 lb 1.6l 949 or Fidanza flywheel feels like butter to me in a CSP car I'm building. also note the 1.6l clutch is a few pounds lighter and lower MOI than a 1.8l. it would not bother me at all on the street driven daily.
In my beast with over 300 ft-lbs Im running the same 1.6l XT with a 4 puck. It also has served me well and It is also not terrible to modulate. The clutch works fine but transmissions Hate that much torque though.
In my beast with over 300 ft-lbs Im running the same 1.6l XT with a 4 puck. It also has served me well and It is also not terrible to modulate. The clutch works fine but transmissions Hate that much torque though.
#20
Moderator
iTrader: (12)
Join Date: Nov 2008
Location: Tampa, Florida
Posts: 21,067
Total Cats: 3,132
Since theses aren't turbine engines, it should be noted that the mass of flywheels are more important to transmission longevity as the engine output is increased.
Lighter flywheels will be faster at the track up until the transmission reaches its limit. If we had stronger transmissions available we could go lighter on the flywheels with relative impunity. We need better transmission options.
If your car makes a dyno measured 300wtq, that's the mean 0% on the chart. Your peak tq pulses are a wee bit higher.
Lighter flywheels will be faster at the track up until the transmission reaches its limit. If we had stronger transmissions available we could go lighter on the flywheels with relative impunity. We need better transmission options.
If your car makes a dyno measured 300wtq, that's the mean 0% on the chart. Your peak tq pulses are a wee bit higher.