front bar: 1" FM -> 1-1/8" RB - fitment?
#1
![Default](https://www.miataturbo.net/images/icons/icon1.gif)
Would it be safe to say that if a 1" FM bar fits now, the RB 1.125" one will fit too?
I've got a TDR i/c which relocates the radiator down, and the fattest fans Spal make. I have a 1" radiator for now, and I anticipate upgrading to one of the new crop at some point (i.e. Trackspeed, or FM or BEGI)/
I've got a TDR i/c which relocates the radiator down, and the fattest fans Spal make. I have a 1" radiator for now, and I anticipate upgrading to one of the new crop at some point (i.e. Trackspeed, or FM or BEGI)/
Last edited by JasonC SBB; 10-22-2010 at 09:38 PM.
#2
2 Props,3 Dildos,& 1 Cat
![](/mt2011/images_td/ranks/supporter1.gif)
![](/mt2011/images_td/ranks/smod.png)
iTrader: (8)
Join Date: Jun 2005
Location: Fake Virginia
Posts: 19,338
Total Cats: 573
![Default](https://www.miataturbo.net/images/icons/icon1.gif)
I have the 1.25 bar and a koyo "small" 37mm radiator and there's plenty of room. it sits almost directly in front of the crank bolt with enough room for a 1/2" socket wrench to be squeezed onto the crank bolt.
![](http://gallery.y8s.com/d/22145-2/DSC00756.jpg)
Though moving the radiator down... I could see problems with fans.
![](http://gallery.y8s.com/d/22145-2/DSC00756.jpg)
Though moving the radiator down... I could see problems with fans.
![](http://gallery.y8s.com/d/22146-2/DSC00755.jpg)
Thread
Thread Starter
Forum
Replies
Last Post
bigmackloud
Miata parts for sale/trade
19
01-08-2021 11:24 AM
StratoBlue1109
Miata parts for sale/trade
21
09-30-2018 01:09 PM