Do I need to upgrade to a 6 speed transmission if only aiming for 200 RWHP?
#1
![Default](https://www.miataturbo.net/images/icons/icon1.gif)
Caveat: I did a search on this but didn't see any real answers
Due to unforseen financial issues, I'm down grading my 300hp "do everything properly" build to a 200hp "mostly stock" build ... so my question is:
do I still need to upgrade to a 6 speed?
for 300hp, yessiree ...... but what about 200hp??
All advice welcome
Due to unforseen financial issues, I'm down grading my 300hp "do everything properly" build to a 200hp "mostly stock" build ... so my question is:
do I still need to upgrade to a 6 speed?
for 300hp, yessiree ...... but what about 200hp??
All advice welcome
![Hustler](https://www.miataturbo.net/images/smilies/hustler.gif)
#5
Elite Member
iTrader: (2)
Join Date: May 2007
Location: Cromwell, Connecticut
Posts: 2,606
Total Cats: 16
![Default](https://www.miataturbo.net/images/icons/icon1.gif)
FWIW I blew mine at 215 rwhp and about 130k miles on it.
I sheared a tooth off of a gear when shifting at redline from 1st to 2nd at autox. The car was boosted for about 2 yrs and autoxed quite a bit.
Save up... get a 6 speed when you can.
I sheared a tooth off of a gear when shifting at redline from 1st to 2nd at autox. The car was boosted for about 2 yrs and autoxed quite a bit.
Save up... get a 6 speed when you can.
#9
Former Vendor
![](/mt2011/images_td/ranks/supporter1.gif)
iTrader: (31)
Join Date: Nov 2006
Location: Sunnyvale, CA
Posts: 15,442
Total Cats: 2,103
![Default](https://www.miataturbo.net/images/icons/icon1.gif)
I popped my 5 at 200whp. Stripped 3rd after a fast 2-3 shift.
You can run the 5-speed, shift it slowly, always worry about it, and it will probably last a season. Or, you can do the 6-speed, shift it as fast as you can, and sleep soundly at night. We suggest a 6-speed in every forced-induction build.
You can run the 5-speed, shift it slowly, always worry about it, and it will probably last a season. Or, you can do the 6-speed, shift it as fast as you can, and sleep soundly at night. We suggest a 6-speed in every forced-induction build.
#12
![Default](https://www.miataturbo.net/images/icons/icon1.gif)
I have a 6sp with 4.10, sometimes I start in second gear at traffic lights. 1st is too short, and 2nd is too tall. I cant wait for my 3.636
I would use the five spd. If just doing de events for fun. Just dont beat the **** out of it. I still dont drag launch my 6 spd or bang thru the gears
Last edited by miatauser884; 12-13-2011 at 01:07 PM.
#14
![Default](https://www.miataturbo.net/images/icons/icon1.gif)
http://grassrootsmotorsports.com/for...g/18158/page1/
#15
![Default](https://www.miataturbo.net/images/icons/icon1.gif)
Yes, but half way down is the problem. Cost. Someone posted a link to a lakewood adapter. The problem is that the 600 adaptet mates a 2000 trans. I think most on here are looking for a sub 1k solution. We need a popular (ie mass produced and cheap from junkyard) strong transmission that puts the shifter in the right location, and a way to produca an adapter plate on the cheap. Driveshsfts can be alteted fairly cheaply if tailhouding is too long. Then we need all the high hp race guys to endorce said swap so adapter plates become the norm and "everyone" does this swap for reliability.
#17
Former Vendor
![](/mt2011/images_td/ranks/supporter1.gif)
iTrader: (31)
Join Date: Nov 2006
Location: Sunnyvale, CA
Posts: 15,442
Total Cats: 2,103
![Default](https://www.miataturbo.net/images/icons/icon1.gif)
I heard the naturally aspirated guys don't have a problem with an uselessly short 1st gear - maybe that's what we should all do
![Giggle](https://www.miataturbo.net/images/smilies/gay.gif)
FYI - the black car will light up 3rd from a 40mph roll. And when I say "light up" I mean "hangs on the rev limiter until the car gets to 80mph". I'll trade 300wtq for a usable 1st gear any day.
#19
![Default](https://www.miataturbo.net/images/icons/icon1.gif)
Originally Posted by jacob300zx
Spoolin2bars has like 50 track days with his 240whp miata and is only on his second trans which has been in the car for for about 25 of those days. Unlike most of the Cali guys I prefer the wider spread of the gates of the 5spd. I think shock loading is the killer of the 5spd.