Big Brake set up
#1
![Default](https://www.miataturbo.net/images/icons/icon1.gif)
I see everybody is interested in big brakes that are junkyard parts so I figured I would post the set up I used on my old miata.
Parts list
03 era mustang 2 piston front callipers and braket (PBR) not cobra
Focus SVT rotors redrill for 4x100 pattern
12in front
11in rear
3/8 flat bar for front, hole set up Is simple no interference
I am not sure on rear setup due to I used 86-92 mustang 8.8 with 4 link with rx7 calipers but should be simple bracket for miata rear brake mount
I would use a larger master cylinder you loose some pedal
Parts list
03 era mustang 2 piston front callipers and braket (PBR) not cobra
Focus SVT rotors redrill for 4x100 pattern
12in front
11in rear
3/8 flat bar for front, hole set up Is simple no interference
I am not sure on rear setup due to I used 86-92 mustang 8.8 with 4 link with rx7 calipers but should be simple bracket for miata rear brake mount
I would use a larger master cylinder you loose some pedal
Thread
Thread Starter
Forum
Replies
Last Post
stoves
Suspension, Brakes, Drivetrain
5
04-21-2016 03:00 PM