#$%^&* Anti-Rattle Spring
#21
![Default](https://www.miataturbo.net/images/icons/icon1.gif)
I wonder if drilling little holes in the pads to poke the wire ends in to would make them less prone to fling off, fly out etc....?
From memory another car I had did have holes for the anti rattle springs....I can't recall which one now....too many years and cars down the road to remember that little detail now...
From memory another car I had did have holes for the anti rattle springs....I can't recall which one now....too many years and cars down the road to remember that little detail now...
#22
![Default](https://www.miataturbo.net/images/icons/icon1.gif)
I wonder if drilling little holes in the pads to poke the wire ends in to would make them less prone to fling off, fly out etc....?
From memory another car I had did have holes for the anti rattle springs....I can't recall which one now....too many years and cars down the road to remember that little detail now...
From memory another car I had did have holes for the anti rattle springs....I can't recall which one now....too many years and cars down the road to remember that little detail now...
#23
![Default](https://www.miataturbo.net/images/icons/icon1.gif)
I like to use the hardware as its intended.
Back when I played mechanic, I had the rear drums pulled on both sides of a customers van. I didn't have anyone around at the time to do my light check and when I saw one of the other guys I grabbed him and said "hey check my lights", jumped in and hit the brakes. WOW, did that ---- fly all the ---- over the shop. Right in front of the customer to further the blow! lol
Back when I played mechanic, I had the rear drums pulled on both sides of a customers van. I didn't have anyone around at the time to do my light check and when I saw one of the other guys I grabbed him and said "hey check my lights", jumped in and hit the brakes. WOW, did that ---- fly all the ---- over the shop. Right in front of the customer to further the blow! lol
#25
Elite Member
iTrader: (1)
Join Date: Feb 2008
Location: Birmingham Alabama
Posts: 7,930
Total Cats: 45
![Default](https://www.miataturbo.net/images/icons/icon1.gif)
It just occurred to me that maybe my long time nemesis, the rattle in the front end that I cannot find could maybe be brake pads rattling, since I don't have the hardware on the pads. I can never find slack in the suspension or steering when I check, so it's been elusive. I hear a metallic clack/clunk when going over things like railroad crossings or hitting a rough patch of road. This has me wondering... though I'm not sure how pronounced a brake pad rattle would be. Would it be enough to hear pretty loudly in the car with the top up?
#26
![Default](https://www.miataturbo.net/images/icons/icon1.gif)
It just occurred to me that maybe my long time nemesis, the rattle in the front end that I cannot find could maybe be brake pads rattling, since I don't have the hardware on the pads. I can never find slack in the suspension or steering when I check, so it's been elusive. I hear a metallic clack/clunk when going over things like railroad crossings or hitting a rough patch of road. This has me wondering... though I'm not sure how pronounced a brake pad rattle would be. Would it be enough to hear pretty loudly in the car with the top up?
#31
![Default](https://www.miataturbo.net/images/icons/icon1.gif)
meh, i dont think there is enough room for the pad to get all kallywonkered in there.
when I worked at rover, i saw one that the pad was worn way down and had managed to invert itself. but there is a ton of friction material and the rotor wears ALOT. obviously the spring clip was long gone.
when I worked at rover, i saw one that the pad was worn way down and had managed to invert itself. but there is a ton of friction material and the rotor wears ALOT. obviously the spring clip was long gone.
#32
![Default](https://www.miataturbo.net/images/icons/icon1.gif)
Since we're ranting about brake hardware, I'll go ahead and add some more.
I just upgraded to 1.8 brakes. EBC Yellows with new rotors. The pads come with some adhesive backed rubber stuff that you can cut out to fit on the backing plates to keep them from squealing. The problem is, the rubber stuff makes them too thick for the caliper to fit over the assembly. It looks like I'll just be using the awesome stop-squeal spray can stuff.
I just upgraded to 1.8 brakes. EBC Yellows with new rotors. The pads come with some adhesive backed rubber stuff that you can cut out to fit on the backing plates to keep them from squealing. The problem is, the rubber stuff makes them too thick for the caliper to fit over the assembly. It looks like I'll just be using the awesome stop-squeal spray can stuff.
Thread
Thread Starter
Forum
Replies
Last Post
StratoBlue1109
Miata parts for sale/trade
21
09-30-2018 01:09 PM
stoves
Suspension, Brakes, Drivetrain
5
04-21-2016 03:00 PM