Moss powercard pro and timing
#1
Moss powercard pro and timing
Hello everyone,
a few months ago i bought a KenneBell twin screw supercharger kit with water to air IC. It was a full kit, but was missing a connector for the Piggy bag system.
I was told, that the fuel and timing computer from the Kennebell system was not reliable, and upgrading to PC Pro with timing (or something else) would be better.
So i bought a used system. But most likely it will need to be reconfigured.
The setup I will be running is using 550CC injectors and 9 or 10 psi boost.
The PC Pro and timing card (including +01 harness) I bought are tuned for 10psi on mp62 with 330cc injectors,
I Drive a 2001 MX5 NBFL 1.8 SVT.
Could anyone help me on this matter?
Some pictures of the cards:
a few months ago i bought a KenneBell twin screw supercharger kit with water to air IC. It was a full kit, but was missing a connector for the Piggy bag system.
I was told, that the fuel and timing computer from the Kennebell system was not reliable, and upgrading to PC Pro with timing (or something else) would be better.
So i bought a used system. But most likely it will need to be reconfigured.
The setup I will be running is using 550CC injectors and 9 or 10 psi boost.
The PC Pro and timing card (including +01 harness) I bought are tuned for 10psi on mp62 with 330cc injectors,
I Drive a 2001 MX5 NBFL 1.8 SVT.
Could anyone help me on this matter?
Some pictures of the cards:
#19
Elite Member
iTrader: (1)
Join Date: Jun 2007
Location: VA, Germany, Afghanistan
Posts: 2,945
Total Cats: 3
I know they used to tell you to send a percentage to them if you sold your stuff using their classifieds, no one with half a brain ever did, I don't know if they even bother asking anymore or not, I haven't logged in over there in ages.