WTB NB Rear O2 Sensor
#1
Junior Member
Thread Starter
iTrader: (3)
Join Date: Dec 2014
Location: Phoenix, AZ
Posts: 127
Total Cats: 60
WTB NB Rear O2 Sensor
Looking for a rear O2 sensor for my MSM. I lost the original that was removed when I went to MS, and I have emissions coming up later this year.
Obviously, I'm looking for a functioning part so I don't have a CEL after I go back to the stock ECU for the inspection. Let me know what you've got.
Obviously, I'm looking for a functioning part so I don't have a CEL after I go back to the stock ECU for the inspection. Let me know what you've got.
#3
Junior Member
Thread Starter
iTrader: (3)
Join Date: Dec 2014
Location: Phoenix, AZ
Posts: 127
Total Cats: 60
Connector is 4 pin in a square pattern. I took a photo of the front one, but rear should be the same (pretty sure the harness end of it is under the seat and carpet, from memory).
It's about 3 feet long and had a grommet integrated to the wire to pass through the body, and at least 1 P-clamp to hang the wire along the run of the exhaust pipe.
Thanks!
It's about 3 feet long and had a grommet integrated to the wire to pass through the body, and at least 1 P-clamp to hang the wire along the run of the exhaust pipe.
Thanks!
Thread
Thread Starter
Forum
Replies
Last Post