MS3 Basic error when selecting fields for SD card logging
#1
MS3 Basic error when selecting fields for SD card logging
My car is a 93 with VVT swap running MS3Basic. Apparently my SD card logging feature by default only logs a few fields. When I try to add additional fields, this is the error message I get. Google isn't being helpful right now. Anyone know what's causing this msg ?
Thanks.
#4
Senior Member
iTrader: (1)
Join Date: Dec 2010
Location: Farmington Hills, MI
Posts: 1,218
Total Cats: 175
That I don't know. I just know it's the same error I've gotten before that was remedied by removing channels. It looks like 55 bytes is the standard MS3 field size, maybe some of the calculations in the MS3 basic firmware take up more space than others?
#9
ahh, ok that's likely what it is. ok good to know, thank you
I don't think that's even possible. Each and every car has wildly different engine states settings based on rpmdot and how noisy it is/isn't. only way to make a "base" setting for that would be to set it really broad which really won't help much. IMO gotta dial in each car's ES every time.
I don't think that's even possible. Each and every car has wildly different engine states settings based on rpmdot and how noisy it is/isn't. only way to make a "base" setting for that would be to set it really broad which really won't help much. IMO gotta dial in each car's ES every time.
#11
Elite Member
iTrader: (10)
Join Date: Jun 2006
Location: Athens, Greece
Posts: 5,990
Total Cats: 361
No, this would require that every single car we have tuned in the past for all the basemaps that have developed, return to base for a retune. This is not possible. Upgrade from 1.4.0 and work on the new settings.
#14
Retired Mech Design Engr
iTrader: (3)
Join Date: Jan 2013
Location: Seneca, SC
Posts: 5,012
Total Cats: 859
Thanks.
#16
mkturbo.com
iTrader: (24)
Join Date: May 2006
Location: Charleston SC
Posts: 15,194
Total Cats: 1,687
I use 1.5 on one car, 1.4.1 on all my others. Unless you like playing with all the latest and greatest. Stick with the 1.4 branch of code. I agree with the rest that engine states can be annoying to deal with. Once you get it tuned it, they can work nicely though.
Thread
Thread Starter
Forum
Replies
Last Post