Turbo Smurfette - Build in progress (slow)
#1425
Elite Member
iTrader: (2)
Join Date: Aug 2016
Location: New Fucking Jersey
Posts: 3,890
Total Cats: 143
That said, he does like to tinker with things so a swap with good FI potential is probably in the cards for him since there's more room for experimentation as we discussed a few pages ago!
#1435
Elite Member
Thread Starter
iTrader: (4)
Join Date: Mar 2012
Location: Northern VA
Posts: 4,648
Total Cats: 544
I hope the OSGiken isn't shot. Sad I just missed that 3.3 final drive run
BMW trans is enticing, just having a hard time locating a trans. Also a bit more than I would hope to spend but might be inevitable.
I don't think it's the twin disk, it seems to engage and disengage. It just makes noises when engaged.
BMW trans is enticing, just having a hard time locating a trans. Also a bit more than I would hope to spend but might be inevitable.
I don't think it's the twin disk, it seems to engage and disengage. It just makes noises when engaged.
#1436
Elite Member
Thread Starter
iTrader: (4)
Join Date: Mar 2012
Location: Northern VA
Posts: 4,648
Total Cats: 544
OK, I threw it in gear with the parking break on. Car still runs. Drive shaft spins. Diff isn't doing anything.
I guess Ring and pinion or the OSGiken is bust. If the pinion is busted, then it wouldn't spin the ring/diff.
Anyone have a 3.63 or 3.3 lying around. How often does OSG need rebuild?
I guess Ring and pinion or the OSGiken is bust. If the pinion is busted, then it wouldn't spin the ring/diff.
Anyone have a 3.63 or 3.3 lying around. How often does OSG need rebuild?
#1440
These things are pretty easy to find. Did you try car-part.com? Email me if you need help. Hope your diff isn't in too bad of shape :(
NA speedo setup is figured out, I'm working on a write-up this week.
NA speedo setup is figured out, I'm working on a write-up this week.
__________________
KPower Industries
Home of the original KMiata Swap
K24 NC swap is coming in 2024! Learn more
info@kpower.industries
Follow us on Facebook and Instagram
KPower Industries
Home of the original KMiata Swap
K24 NC swap is coming in 2024! Learn more
info@kpower.industries
Follow us on Facebook and Instagram