Yellow
#45
Junior Member
Thread Starter
iTrader: (1)
Join Date: Aug 2010
Location: Sixshooter's Basement
Posts: 333
Total Cats: 38
QMAX is in.
Super Miata Radiator in as well. I've got a large Spal to go with it.. But i still do not fully understand what the best practice is to install. Flush? Space?
Super Miata Radiator in as well. I've got a large Spal to go with it.. But i still do not fully understand what the best practice is to install. Flush? Space?
#46
Junior Member
Thread Starter
iTrader: (1)
Join Date: Aug 2010
Location: Sixshooter's Basement
Posts: 333
Total Cats: 38
Took a risk with the FM silicone IC piping for the TS kit. At first sight, it looks like its not going to work with the lower hose. I'm going to try to replace the lower hose with a stock 1.6 hose and move the IC back 3-4"
#56
Junior Member
Thread Starter
iTrader: (1)
Join Date: Aug 2010
Location: Sixshooter's Basement
Posts: 333
Total Cats: 38
More disappointment than anything this weekend, but heading in the right direction I suppose.
Skunk 2 manifold was a pain in the *** to install. Pulled the alternator to make it easier, but I would rather pull the motor than try to thread and torque the bottom nuts again. Waiting till the last second to put on the TB, still need to be able to reach some coolant lines etc..
Still struggling with my hotside IC piping. I took a risk with the FM silicone pipe, but my PS, and one piece lower rad hose are fighting it. FM says that the NA1 two piece metal lower will work...but im having doubts. I would imagine the IC pipe rubbing on the radiator hose is a bad thing. Anyone have a NA1 lower hose for sale?
Skunk 2 manifold was a pain in the *** to install. Pulled the alternator to make it easier, but I would rather pull the motor than try to thread and torque the bottom nuts again. Waiting till the last second to put on the TB, still need to be able to reach some coolant lines etc..
Still struggling with my hotside IC piping. I took a risk with the FM silicone pipe, but my PS, and one piece lower rad hose are fighting it. FM says that the NA1 two piece metal lower will work...but im having doubts. I would imagine the IC pipe rubbing on the radiator hose is a bad thing. Anyone have a NA1 lower hose for sale?
#57
Moderator
iTrader: (12)
Join Date: Nov 2008
Location: Tampa, Florida
Posts: 21,053
Total Cats: 3,128
In the side view through the wheel well pic i have to ask if the radiator hose went above the intercooler hose it would make any difference in fitment?
Fwiw, everything touches somewhere on my car.
Fwiw, everything touches somewhere on my car.