Plug an play dash gauge for NB (and soon NA) for Megasquirt
#1
Elite Member
Thread Starter
Join Date: Mar 2006
Location: Schwarzenberg, Germany
Posts: 1,558
Total Cats: 105
Plug and play dash gauge for NB (and soon NA) for Megasquirt
Hi guys,
as mentioned in this thread: https://www.miataturbo.net/megasquir...cluster-91370/ I managed to put the little CAN Megasquirt gauge in the spot of my dummy oil pressure gauge.
Now the developer of the gauge found this so interesting that he managed to develop a PNP version of the gauge especially for the MX-5/Miata MK2 aka NB (NBFL as well of course).
There will be an NA version of the gauge soon.
And as I just read there will also be an OBD2 version coming...
I am in no way connected to the company (other then giving birth to the idea) and lending a NA gauge cluster for development - but feel free to check out the gauge at 52mm Display - CANchecked - Displays für Motormanagements
(obviously the NB gauge didn't even make it to the homepage up to now)
Greets
Sven
as mentioned in this thread: https://www.miataturbo.net/megasquir...cluster-91370/ I managed to put the little CAN Megasquirt gauge in the spot of my dummy oil pressure gauge.
Now the developer of the gauge found this so interesting that he managed to develop a PNP version of the gauge especially for the MX-5/Miata MK2 aka NB (NBFL as well of course).
There will be an NA version of the gauge soon.
And as I just read there will also be an OBD2 version coming...
I am in no way connected to the company (other then giving birth to the idea) and lending a NA gauge cluster for development - but feel free to check out the gauge at 52mm Display - CANchecked - Displays für Motormanagements
(obviously the NB gauge didn't even make it to the homepage up to now)
Greets
Sven
Last edited by Zaphod; 06-20-2018 at 01:22 AM.
#4
Correct. Not without a LOT of hacking.
I really like where this is going though. I fitted an AEM uego into an nb2 cluster before, it was a whole lot of work removing it from the gauge and then cutting the cluster to fit the guts, if this is completely pnp with zero cutting/modification, its a brilliant idea.
I really like where this is going though. I fitted an AEM uego into an nb2 cluster before, it was a whole lot of work removing it from the gauge and then cutting the cluster to fit the guts, if this is completely pnp with zero cutting/modification, its a brilliant idea.
#6
Senior Member
iTrader: (1)
Join Date: Dec 2010
Location: Farmington Hills, MI
Posts: 1,218
Total Cats: 175
#13
Elite Member
Thread Starter
Join Date: Mar 2006
Location: Schwarzenberg, Germany
Posts: 1,558
Total Cats: 105
I just wanted to give you a quick headsup- the NA/NB version of the gauge seems to be available (MS version only - OBD and NC version still in progress)
See here:
Mazda MX5 Tachoumbau NA/NB/NC > CANchecked - Displays für Motormanagements
If you got questions feel free to contact Hendrik at CanChecked ...
See here:
Mazda MX5 Tachoumbau NA/NB/NC > CANchecked - Displays für Motormanagements
If you got questions feel free to contact Hendrik at CanChecked ...