Welp, stripped exhaust housing bolt
#6
Use a sharp chisel and a hammer to knock it lefty loosey. You will have to start a mil or two in from one of the points of the bolt head to make a good purchase. You are basically making a very slow impact gun. if that doesn't work, cut the head off with a die grinder, split the halves, weld a nut on the stud and extract it like a regular bolt.
Thread
Thread Starter
Forum
Replies
Last Post
EricJ
Suspension, Brakes, Drivetrain
7
09-11-2021 11:10 PM
oldfart
Insert BS here
8
08-12-2013 01:06 PM
rider384
Insert BS here
2
05-16-2010 10:28 PM