Incorrect tooth clocking on ATI dampers
#89
Anyone installed the flawed damper and can tell how much did it actually effect performance? ie. shifted the powerband, hurt the power..? Would it even run the engine if the key hole was in 'worst case scenario' right in the between the TB grooves?
I purchased mine through fab9 in 1/2018 and the shop installed it few days before I noticed this thread. The engine is not finished yet so I'll have it removed and check what's the situation but removing it is not as much of a problem as sending it from eastern europe to states and getting back a replacement. It was over $150 in shipping and import taxes to get it here in first place and paying that twice more is depressing to say at least.
I purchased mine through fab9 in 1/2018 and the shop installed it few days before I noticed this thread. The engine is not finished yet so I'll have it removed and check what's the situation but removing it is not as much of a problem as sending it from eastern europe to states and getting back a replacement. It was over $150 in shipping and import taxes to get it here in first place and paying that twice more is depressing to say at least.