Slowest MSM build thread evar! Now a whole lot less slow.
#30
Elite Member
Thread Starter
iTrader: (11)
Join Date: Apr 2007
Location: VA Beach
Posts: 1,998
Total Cats: 51
This is the current plan for the fuel system. AN6 from tank to filter than to reg and one port back to tank other to the stock line to the front. Simple but should be effective.
DW300
ID1000
Fuel 818
Areomotive 1:1 Regulator
30 Amp relay for FP off batt
DW300
ID1000
Fuel 818
Areomotive 1:1 Regulator
30 Amp relay for FP off batt
#34
Elite Member
Thread Starter
iTrader: (11)
Join Date: Apr 2007
Location: VA Beach
Posts: 1,998
Total Cats: 51
There is not enough documentation on the how this fuel setup is done so here are some pics. Tank adapted to AN6 lines to Filter to regulator one port back to tank other back to stock fuel line. From what I have gathered this setup HAS supported 430 whp on E85. I removed carbon canister to make room but this all fits right where the stock fuel filter sat. The bottom if the car in this area has studs there to mount the carbon canister so I used them to bolt in this setup.