EFR 6258, Impellar replacement?
#24
SADFab Destructive Testing Engineer
![](/mt2011/images_td/ranks/supporter1.gif)
![](/mt2011/images_td/ranks/moderator.png)
iTrader: (5)
Join Date: Apr 2014
Location: Beaverton, USA
Posts: 18,642
Total Cats: 1,866
![Default](https://www.miataturbo.net/images/icons/icon1.gif)
Ryan mispoke. And I hope he told Southeast Power Systems that. Its actually the turbine wheel that broke.
#29
Elite Member
Thread Starter
iTrader: (6)
Join Date: Feb 2013
Location: A cave in Va
Posts: 3,395
Total Cats: 456
![Default](https://www.miataturbo.net/images/icons/icon1.gif)
And the repair price quoted was for the GammaTi wheel, cleaning, balance, gaskets, assembly.
They said they can repair almost anything, within reason. Also sell just a CHRA, so you don't have to buy a supercore with the compressor housing. Center housing is about 800 bucks.
Mike also said that he has broken them exactly how I did. Says at room temperature they are very similar to a wine glass. A real bummer though to **** can 600 bucks for a small chip. Turbo Lyfe.
They said they can repair almost anything, within reason. Also sell just a CHRA, so you don't have to buy a supercore with the compressor housing. Center housing is about 800 bucks.
Mike also said that he has broken them exactly how I did. Says at room temperature they are very similar to a wine glass. A real bummer though to **** can 600 bucks for a small chip. Turbo Lyfe.