Semi-Universal Actuator Bracket Now Available!
#1
Former Vendor
Thread Starter
Join Date: Jul 2017
Location: Spring Branch, TX
Posts: 83
Total Cats: -99
Semi-Universal Actuator Bracket Now Available!
Clocking turbos is the easy part, but mounting the actuator bracket after it's clocked? Not so much! Bell Tuning & Performance has created a semi-universal wastegate actuator mounting bracket to make it easier! It fits the 2.5" Compressor Inlet Flange adapter and bolts to the turbo. It can we adjusted to the side, reversed, and bent to accommodate bent and straight arm actuators. The mounting bracket also sits the actuator rod high enough to ensure plenty of clearance for the oil inlet fitting. Made from stainless steel to ensure durability and look good!
More Info
More Info
#6
Why is the bolt not seated in the saddle cut out? does it fit? 20lb wastegate would put probably close to 10 ft.lbs of force on this bracket. It will flex for sure.
This one is properly supported. simple. Full circle mounting holes..and for gawd sake, rounded corners. The laser does not care if you make swoopy, sexy parts, but customers do.
This one is properly supported. simple. Full circle mounting holes..and for gawd sake, rounded corners. The laser does not care if you make swoopy, sexy parts, but customers do.
Last edited by ryansmoneypit; 02-02-2018 at 05:05 PM.
#7
SEMI-UNIVERSAL WASTEGATE ACTUATOR MOUNTING BRACKET TUBE MAN!
I usually keep my mouth shut on the forum because I know better.
Its just.. I just remember reading Maximum Boost tons of years ago and the amazing foundation it gave me and knowledge in that book, for the time. Add the innovation and everything accomplished.
To see it boiled down to what Bell is today, and to these newly released products. IMHO, it all looks like backyard DIY Craigslist hardware and craftsmanship. IDK, just seems backwards..
I usually keep my mouth shut on the forum because I know better.
Its just.. I just remember reading Maximum Boost tons of years ago and the amazing foundation it gave me and knowledge in that book, for the time. Add the innovation and everything accomplished.
To see it boiled down to what Bell is today, and to these newly released products. IMHO, it all looks like backyard DIY Craigslist hardware and craftsmanship. IDK, just seems backwards..
#9
Former Vendor
Thread Starter
Join Date: Jul 2017
Location: Spring Branch, TX
Posts: 83
Total Cats: -99
Why is the bolt not seated in the saddle cut out? does it fit? 20lb wastegate would put probably close to 10 ft.lbs of force on this bracket. It will flex for sure.
This one is properly supported. simple. Full circle mounting holes..and for gawd sake, rounded corners. The laser does not care if you make swoopy, sexy parts, but customers do.
This one is properly supported. simple. Full circle mounting holes..and for gawd sake, rounded corners. The laser does not care if you make swoopy, sexy parts, but customers do.
Stephanie
#11
Former Vendor
Thread Starter
Join Date: Jul 2017
Location: Spring Branch, TX
Posts: 83
Total Cats: -99
And that is fine. There are others who need something like this,and I only use it on some turbos. Not all. We have had too many requests to find an easier solution to ignore them.
Stephanie
Stephanie
Thread
Thread Starter
Forum
Replies
Last Post
ThePass
Prefabbed Turbo Kits
12
04-11-2014 05:16 PM
Doppelgänger
Miata parts for sale/trade
8
03-29-2011 10:24 AM
mx5newbie
Miata parts for sale/trade
3
01-28-2011 12:04 PM