More Money Than Brains
#470
He’s still going...he does top notch work and there are other cars there. Plus it’s not just exhaust. He’s custom mounting my seats by modifying the trans tunnel and doing various other things. It’s fine...I told him just make it pretty. I’ll upload what he’s done this far but he has many projects at once...his shop is full of major builds. Sometimes to get good work you have to wait.
Edit:
Pictures I've received thus far
The sealer is curing over the weekend...undercoating goes on monday. He's been working on the brackets but I haven't received pictures yet. Glad to have more room for the seat to fit better. The first muffler he ordered he wasn't happy with so he ordered a different one. Ill stop by tomorrow and see what else has been done.
Edit:
Pictures I've received thus far
The sealer is curing over the weekend...undercoating goes on monday. He's been working on the brackets but I haven't received pictures yet. Glad to have more room for the seat to fit better. The first muffler he ordered he wasn't happy with so he ordered a different one. Ill stop by tomorrow and see what else has been done.
Last edited by TonyMontana; 01-21-2018 at 08:54 PM.
#473
Driver seat in...even with the seat mounted all the way on the modified tunnel it touches slightly...but the door closes so it should work. He's my height and notes the position is perfect. Seat isn't tightened down but looks good. Close-up shows how bad that window trim really is lol...might have to change those things.
#476
Junior Member
iTrader: (1)
Join Date: Sep 2017
Location: Huntington Beach, CA
Posts: 230
Total Cats: 22
Is he going to do an oval/flattened pipe under the transmount? Having a flange where it's at is asking to get it ripped off on the track. If my flange were there it would be below the frame rails
#478
Junior Member
iTrader: (1)
Join Date: Sep 2017
Location: Huntington Beach, CA
Posts: 230
Total Cats: 22
Have him put a straight edge on it once you install the clamp. I'd bet money it's below the rails. Maybe it's cause my frame rails are flattened from grinding on curbs.
When I get mine redone I'm going to have him put the vband where your second weld up from the flange is, tucked up and safe and then ovalized under the trans mount
When I get mine redone I'm going to have him put the vband where your second weld up from the flange is, tucked up and safe and then ovalized under the trans mount
#479
Have him put a straight edge on it once you install the clamp. I'd bet money it's below the rails. Maybe it's cause my frame rails are flattened from grinding on curbs.
When I get mine redone I'm going to have him put the vband where your second weld up from the flange is, tucked up and safe and then ovalized under the trans mount
When I get mine redone I'm going to have him put the vband where your second weld up from the flange is, tucked up and safe and then ovalized under the trans mount