1.6 turbo mock up pics
#24
It's gonna cost you about $40 if you don't have any of this stuff already, but you can basically pick it all up on the way home from work...
https://www.miataturbo.net/build-thr...6/#post1383638
Heavy Duty Variable Speed Rotary Tool Kit 31 Pc
Dremel 1/8 in. Spear Shaped Tungsten Carbide Cutter for Steel, Stainless Steel, Iron, Ceramics, Plastics, and Hard Wood-9903 - The Home Depot
Permatex 80038 - Prussian Blue | O'Reilly Auto Parts
https://www.miataturbo.net/build-thr...6/#post1383638
Heavy Duty Variable Speed Rotary Tool Kit 31 Pc
Dremel 1/8 in. Spear Shaped Tungsten Carbide Cutter for Steel, Stainless Steel, Iron, Ceramics, Plastics, and Hard Wood-9903 - The Home Depot
Permatex 80038 - Prussian Blue | O'Reilly Auto Parts
#25
It's gonna cost you about $40 if you don't have any of this stuff already, but you can basically pick it all up on the way home from work...
https://www.miataturbo.net/build-thr...6/#post1383638
Heavy Duty Variable Speed Rotary Tool Kit 31 Pc
Dremel 1/8 in. Spear Shaped Tungsten Carbide Cutter for Steel, Stainless Steel, Iron, Ceramics, Plastics, and Hard Wood-9903 - The Home Depot
Permatex 80038 - Prussian Blue O'Reilly Auto Parts
https://www.miataturbo.net/build-thr...6/#post1383638
Heavy Duty Variable Speed Rotary Tool Kit 31 Pc
Dremel 1/8 in. Spear Shaped Tungsten Carbide Cutter for Steel, Stainless Steel, Iron, Ceramics, Plastics, and Hard Wood-9903 - The Home Depot
Permatex 80038 - Prussian Blue O'Reilly Auto Parts
Thanks man. I've got most of it, need to grab the carbide cutter from HD racing
#28
Quick question- anyone know which fittings I need to get the t3 working with this oil line? I already have an m10 x1.5 to 4an for the block.....RACING TURBO UPGRADE OIL COOLING FEED LINE 36" T3 T4 T04E T70 T60 MIATA RX7 RX8 | eBay
I also have the flange that bolts to the feed side of turbo
I also have the flange that bolts to the feed side of turbo
#30
Can you share where you bought your turbo? I am looking for one with the same specs.
not insisting, inquiring.
here are the specs on the turbo:
T3 Internal wastegate COM.42 A/R 45 Trim.48A/R
here are the specs on the turbo:
T3 Internal wastegate COM.42 A/R 45 Trim.48A/R
- 2.37" Inlet Diameter
- 2.28" Outlet Diameter
- Wet Floating Bearing
- T3 Flange
- Oil Inlet M12X1.5
- Compressor Wheel
- Ind: 1.67"
- Exd:2.37"
- Turbiner Wheel
- 4-Bolt Standard Hot Side
- Ind: 2.52"
- Exd: 1.82"