More Money Than Brains
#161
Have you ever taken apart a K engine? A BP is like a lego set compared to it.
And What is there so much more complicated in a basic turbo BP? 2 oil lines and 2 water lines? everything else unbolts with the quickness. I mean, there are legitimately very few modern cars out there more simple than a Miata, and very few modern engines simpler than a BP. I can't even think of many cars easier to wrench on....
I mean I get it, it's the feeling of simplicity and reliability that is the appeal here. And in some ways it is simpler, and in most ways its more reliable, at least on track anyways, I just think most people get carried away lusting after something they've never really even owned. "K SWAP BRO, SO EASY YOU CAN DO IT ON YOUR LUNCH BREAK".........."brb, doing kswap"........."ok done, ready for the track"............
Now I will admit, I also have not owned a K Miata, but I have owned 4 RSX's many years ago, a TSX a few years ago, and various other K cars, so at least I speak from some sort of personal exp.
In the future, after OP finishes his epic BP build and enjoys it, I would LOVE to see him build a boosted K
And What is there so much more complicated in a basic turbo BP? 2 oil lines and 2 water lines? everything else unbolts with the quickness. I mean, there are legitimately very few modern cars out there more simple than a Miata, and very few modern engines simpler than a BP. I can't even think of many cars easier to wrench on....
I mean I get it, it's the feeling of simplicity and reliability that is the appeal here. And in some ways it is simpler, and in most ways its more reliable, at least on track anyways, I just think most people get carried away lusting after something they've never really even owned. "K SWAP BRO, SO EASY YOU CAN DO IT ON YOUR LUNCH BREAK".........."brb, doing kswap"........."ok done, ready for the track"............
Now I will admit, I also have not owned a K Miata, but I have owned 4 RSX's many years ago, a TSX a few years ago, and various other K cars, so at least I speak from some sort of personal exp.
In the future, after OP finishes his epic BP build and enjoys it, I would LOVE to see him build a boosted K
Now compare it to this..
I know which I'd rather work on...neither are really that hard to do
That said, I don't want to intrude on OP's thread. I think his turbo build is awesome. I had issues with my turbo setup on my Miata on track and admit to having a bad taste in my mouth about going down that path again with all the incentives out there in the Kswap if your end goal is ~250whp.
#162
Interesting predicament
The ID 1050x injectors i received do not fit correctly. The electrical plug interferes with the exhaust manifold and causes them to tilt off perpendicular. As you can see they tilt up causing them to be off center and not line up with the fuel rail. I did the google search and someone on miata.net noted this and stated the upper and lower adapters are not correct. I have contacted ID to see if they can send me the correct adapter. Comparing them to the stock injector its clear that the electrical adapter is too low on the injector causing it to interfere. Ill keep you posted as to their response but the fuel rail install was halted.
With the intake manifold off you get the idea. The electrical component clearly interferes when the injector is in the correct orientation and angle. Guess we shall see.
The ID 1050x injectors i received do not fit correctly. The electrical plug interferes with the exhaust manifold and causes them to tilt off perpendicular. As you can see they tilt up causing them to be off center and not line up with the fuel rail. I did the google search and someone on miata.net noted this and stated the upper and lower adapters are not correct. I have contacted ID to see if they can send me the correct adapter. Comparing them to the stock injector its clear that the electrical adapter is too low on the injector causing it to interfere. Ill keep you posted as to their response but the fuel rail install was halted.
With the intake manifold off you get the idea. The electrical component clearly interferes when the injector is in the correct orientation and angle. Guess we shall see.
#165
Elite Member
iTrader: (2)
Join Date: May 2008
Location: Portland, Oregon
Posts: 3,468
Total Cats: 365
EFR + EBC = as much like a K as you want it to be, minus a bit of top end rpm. With more mid-range. I have limited my car to 200 ft/lbs, and it was phenomenal at Laguna this past weekend.
Just wait on the manifold. Build the car. You are almost there. You don't like it after a month or two, sell the whole shebang and go K.
Just wait on the manifold. Build the car. You are almost there. You don't like it after a month or two, sell the whole shebang and go K.
#167
So with the intake manifold in place I was able to get the injectors installed. Here's the picture of the exact angle they have to be to work...apparently ID is aware of this issue but they just don't care. So this is the solution.
Managed to get the rear housing for the QMAX reroute installed. Nothing to complicated here...even for me.
Also got the Skunk2 installed. The studs were still in the intake manifold so rather than use all 4 bolts they provided I just used the studs that were there. Should work fine.
Going to work on getting the coils made tomorrow and get them installed as well. I received the email about my transmission kit shipping so hopefully sometime next week I have that and can get it on the car and get the engine back in.
Managed to get the rear housing for the QMAX reroute installed. Nothing to complicated here...even for me.
Also got the Skunk2 installed. The studs were still in the intake manifold so rather than use all 4 bolts they provided I just used the studs that were there. Should work fine.
Going to work on getting the coils made tomorrow and get them installed as well. I received the email about my transmission kit shipping so hopefully sometime next week I have that and can get it on the car and get the engine back in.
#168
Elite Member
iTrader: (1)
Join Date: Apr 2014
Location: SF Bay Area, CA
Posts: 3,108
Total Cats: 560
I wouldn't worry about the injectors too much. I have run my Flow Force's several different directions, and while I'm happy that the connectors all point down now, I am not convinced that it actually make any difference in real life performance. I do think the connectors pointing down is the correct orientation for my dual cone injectors, but I was able to run just as fast with them pointed back, as well as about 10 o'clock.
Did you get them from 949? I wonder if there are medium length ones that would work with flow force adapters.
Did you get them from 949? I wonder if there are medium length ones that would work with flow force adapters.
#169
I wouldn't worry about the injectors too much. I have run my Flow Force's several different directions, and while I'm happy that the connectors all point down now, I am not convinced that it actually make any difference in real life performance. I do think the connectors pointing down is the correct orientation for my dual cone injectors, but I was able to run just as fast with them pointed back, as well as about 10 o'clock.
Did you get them from 949? I wonder if there are medium length ones that would work with flow force adapters.
Did you get them from 949? I wonder if there are medium length ones that would work with flow force adapters.
#172
Im looking at doing something different with the dash gauges. I've been doing the google search but haven't found a super clear answer to a question. Is there a semi easy way to change the fuel gauge to something other than stock? Im thinking of changing all the gauges to a more focused track setup but still want a fuel gauge.
#173
Went to do the coils today but had a hiccup.
Contacted Sadfab and he noted they had this issue on 99-00 heads which mine certainly isn't so not sure if the valve cover is different or what. No worries -- he's taking care of it and sending me a new one that fits correctly. Its things like this though that make me tell others to start with an unmolested example so you don't have issues like this. Most certainly not anyones fault just **** that happens I guess.
To keep making progress got the fuel line mounted under the car
Mounted up my interfooler
Secured the EGR delete plates and plugged off the fuel rail where the stock FPR would go.
Got the sandwich plate for the oil cooler mounted as well as my engine mounts.
Running without the support bracket on the intake manifold
Sixshooter helped me with a giant saw to modify the A/C bracket. I cut out part of the lower bracket for increased clearance for the turbo oil drain. Makes more room and doesn't alter structural integrity. Im happy with it. Wish I could say this was a first choice preference but reality was the drain was basically hitting the bracket so modifications were a must lol. Hooray for **** ups.
Im pretty sure I'm going to order an IQ3 for my dash solution. With the transmission swap speedo issues and the plethora of sensors I think this will keep it the cleanest. I just don't want an A-pilar and center console full of gauges so I think this will be best for me. I will likely steal aidans look with the IQ3 in the center and the AFR and Boost Gauge on either side. Everything else it appears comes from the ECU to the IQ3. For the speedometer I need to figure out how to get a VSS signal to the ECU or just use the GPS speedometer. Not sure what to do on this...what I know is purely from reading so Ill have to dive further into this. Also need to figure out the fuel level gauge since I want this to work as well. Will likely order the IQ3, my seats, and harnesses this week.
Contacted Sadfab and he noted they had this issue on 99-00 heads which mine certainly isn't so not sure if the valve cover is different or what. No worries -- he's taking care of it and sending me a new one that fits correctly. Its things like this though that make me tell others to start with an unmolested example so you don't have issues like this. Most certainly not anyones fault just **** that happens I guess.
To keep making progress got the fuel line mounted under the car
Mounted up my interfooler
Secured the EGR delete plates and plugged off the fuel rail where the stock FPR would go.
Got the sandwich plate for the oil cooler mounted as well as my engine mounts.
Running without the support bracket on the intake manifold
Sixshooter helped me with a giant saw to modify the A/C bracket. I cut out part of the lower bracket for increased clearance for the turbo oil drain. Makes more room and doesn't alter structural integrity. Im happy with it. Wish I could say this was a first choice preference but reality was the drain was basically hitting the bracket so modifications were a must lol. Hooray for **** ups.
Im pretty sure I'm going to order an IQ3 for my dash solution. With the transmission swap speedo issues and the plethora of sensors I think this will keep it the cleanest. I just don't want an A-pilar and center console full of gauges so I think this will be best for me. I will likely steal aidans look with the IQ3 in the center and the AFR and Boost Gauge on either side. Everything else it appears comes from the ECU to the IQ3. For the speedometer I need to figure out how to get a VSS signal to the ECU or just use the GPS speedometer. Not sure what to do on this...what I know is purely from reading so Ill have to dive further into this. Also need to figure out the fuel level gauge since I want this to work as well. Will likely order the IQ3, my seats, and harnesses this week.
#175
If this transmission has a speed sensor on it I surely don't know where it is. I thought BMWs got their speedo signal from another source. I may have to swap out the right front knuckle for an ABS knuckle. Then wire an ABS sensor to a Dakota Digital box and send that VSS signal to the ECU. Then I can send that to any variety of speedos.
#178
If this transmission has a speed sensor on it I surely don't know where it is. I thought BMWs got their speedo signal from another source. I may have to swap out the right front knuckle for an ABS knuckle. Then wire an ABS sensor to a Dakota Digital box and send that VSS signal to the ECU. Then I can send that to any variety of speedos.