EFR6258 based Artech Part Out
#1
Senior Member
Thread Starter
iTrader: (2)
Join Date: Nov 2013
Location: Redlands, CA
Posts: 953
Total Cats: 41
EFR6258 based Artech Part Out
I am going to list my build as I am changing directions and converting the chassis back to stock (how I bought it)
There is a lot of stuff for sale, so if you have questions it will be much easier for me to answer PMs individually instead of several posts on this thread. I am basing my prices on what I have seen sell over the years.
EFR6258, probably 1k miles on it after a warranty claim, has ceramic coating, $1300 every fitting bolted to the turbo comes with it also comes with low boost actuator
Artech top mounted EFR-specfic manifold and 3" downpipe, also coated (has some deteriorated wrap on it, useless) $900
NA Artech 3" exhaust + test pipe $500
Oil feed + drain set up, stainless parts (TSE adapter, -4an [may want a shorter feed line], 90* fitting, -10an drain, you will need your own oil pan to 10an fitting) $100
Artech modifeid coolant mixing manifold $60 you need this or similar to fit the manifold
Intercooler piping + vibrant 550hp (fab9 stage 2) $250
MS3 Basic from MSLabs $800 is tuned for this full set-up by Vlad (18psi)
Toyota COP TSE kit + brand new 1 step colder plugs $250
Force Flow 640cc injectors $250
FM1 clutch, barely used for 2k miles, $200
Forged Manly rods / new APR 2000 bolts $300
Forge (the nice one) BOV $100
TEIN coilovers $450
Hard Dog Double Hoop $250
Two medium boost EFR actuators $30 each
G-Loc brake pads (bedded, used but only on street for roughly 2k miles) $150
949Crossflow radiator basically new. $300
Video channel of said kit being a ricer: youtubechannel
I have more and I will list it as I think of it all but that is the bulk of it. If you want multiple things, let me know, otherwise they can be sold separate but I would really like to see someone buy the hotside bits and run allofit.
There is a lot of stuff for sale, so if you have questions it will be much easier for me to answer PMs individually instead of several posts on this thread. I am basing my prices on what I have seen sell over the years.
Artech top mounted EFR-specfic manifold and 3" downpipe, also coated (has some deteriorated wrap on it, useless) $900
NA Artech 3" exhaust + test pipe $500
Oil feed + drain set up, stainless parts (TSE adapter, -4an [may want a shorter feed line], 90* fitting, -10an drain, you will need your own oil pan to 10an fitting) $100
Artech modifeid coolant mixing manifold $60 you need this or similar to fit the manifold
Intercooler piping + vibrant 550hp (fab9 stage 2) $250
Toyota COP TSE kit + brand new 1 step colder plugs $250
Forge (the nice one) BOV $100
Hard Dog Double Hoop $250
Two medium boost EFR actuators $30 each
949Crossflow radiator basically new. $300
Video channel of said kit being a ricer: youtubechannel
I have more and I will list it as I think of it all but that is the bulk of it. If you want multiple things, let me know, otherwise they can be sold separate but I would really like to see someone buy the hotside bits and run allofit.
Last edited by Lexzar; 09-26-2017 at 12:01 PM.