Little car BIG dumpster fire part II
#1
Little car BIG dumpster fire part II
So in November of 2016 I decided that Jeeps were no longer my thing. So I sold my 95 Cherokee and bought my current 92 Miata for $700. To start her off, she was pretty rough. She had a botched timing belt job, cam bolts were backed out and rubbing on the cam gears, had a leaky thermostat, and a very bad paint job (she still does).
My first order of business was to get her running well and planted on the street. Thankfully the timing belt job had only been done a few hundred miles before me buying it so nothing serious was needed. I set the timing back to it's proper setting, replaced the thermostat, went ahead and replaced all the belts, and got some Falken Azeni RT615K tires on some TRM FF10 wheels. That really settled everything down well.
Also that hardtop is no more. I got it from a buddy but gave it back since it leaked terribly from the window seals. Be wary of Smoothline Hardtops (no money lost on that thankfully).
As she sits now, she got a Hard Dog M2 Sport Double Diagonal roll bar and some Moss Miata Raydot mirrors. DO NOT RECOMMEND THESE! The glass isn't held in place well and rattles terribly. Will be getting something from REV9 in the future.
Now I've got a MS2PNP on order and will also be picking up some FF 640cc Injectors to compliment them. I also picked up a big treadstone intercooler that I may or may not use, not sure yet. Currently have a cast iron log manifold and a 50 trim T3 turbo that should be delivered on Monday.
No ****, this thing is pretty big. 28x7x2.5, maybe too big?
The t3 trim cast manifold
And the 50 trim T3 I picked up for $50!
I've also got lots of good stuff planned for the future as well
Interior:
Almost everything will be done through RevLimiter and MiataRoadster. Been thinking about some sort of retro bucket seats.
Exterior and wheels and tires: Needs paint, 15x9 or x10 6uls with 245 RS4's
Suspension and Brakes: WANT XIDAS! No idea on brakes yet, maybe a FM BBK?
Drivetrain: 3.9 torsen, 6 speed maybe?, and a 949 Supermiata clutch.
My first order of business was to get her running well and planted on the street. Thankfully the timing belt job had only been done a few hundred miles before me buying it so nothing serious was needed. I set the timing back to it's proper setting, replaced the thermostat, went ahead and replaced all the belts, and got some Falken Azeni RT615K tires on some TRM FF10 wheels. That really settled everything down well.
Also that hardtop is no more. I got it from a buddy but gave it back since it leaked terribly from the window seals. Be wary of Smoothline Hardtops (no money lost on that thankfully).
As she sits now, she got a Hard Dog M2 Sport Double Diagonal roll bar and some Moss Miata Raydot mirrors. DO NOT RECOMMEND THESE! The glass isn't held in place well and rattles terribly. Will be getting something from REV9 in the future.
Now I've got a MS2PNP on order and will also be picking up some FF 640cc Injectors to compliment them. I also picked up a big treadstone intercooler that I may or may not use, not sure yet. Currently have a cast iron log manifold and a 50 trim T3 turbo that should be delivered on Monday.
No ****, this thing is pretty big. 28x7x2.5, maybe too big?
The t3 trim cast manifold
And the 50 trim T3 I picked up for $50!
I've also got lots of good stuff planned for the future as well
Interior:
Almost everything will be done through RevLimiter and MiataRoadster. Been thinking about some sort of retro bucket seats.
Exterior and wheels and tires: Needs paint, 15x9 or x10 6uls with 245 RS4's
Suspension and Brakes: WANT XIDAS! No idea on brakes yet, maybe a FM BBK?
Drivetrain: 3.9 torsen, 6 speed maybe?, and a 949 Supermiata clutch.
Last edited by LittleCarBigFun; 10-01-2017 at 02:30 PM. Reason: Edit: doing this on mobile and accidentally hit submit before I was done
#2
Senior Member
iTrader: (1)
Join Date: Apr 2011
Location: Jonesboro Arkansas
Posts: 553
Total Cats: 25
Interesting, I would def make sure you get all the supporting mods. With more power and the snail you will want better brakes, cooling and ect. I can vouch for the 4 piston wilwood kit from FM. I did all four corners.
#6
Senior Member
iTrader: (1)
Join Date: Apr 2011
Location: Jonesboro Arkansas
Posts: 553
Total Cats: 25
Mishimoto is junk. Get the 949 crossflow. $349 and done, keep the factory fans they will be fine. They only cool the car at low speeds anyway. A good radiator and ducting will go a long way. There is a definitive thread on this somewhere here.
http://949racing.com/SuperMiata-Cros...tor-miata.aspx
http://949racing.com/SuperMiata-Cros...tor-miata.aspx
#10
Elite Member
iTrader: (2)
Join Date: Aug 2016
Location: New Fucking Jersey
Posts: 3,890
Total Cats: 143
Yeah, the cost differential between koyo and 949 makes the latter a no brainer. Id likely have done that if I had to make the choice now.
The koyo is really nice but... The 949 radiator was designed specifically for this purpose. They also have a CSF radiator that's a bit cheaper IIRC.
The koyo is really nice but... The 949 radiator was designed specifically for this purpose. They also have a CSF radiator that's a bit cheaper IIRC.
#12
mkturbo.com
iTrader: (24)
Join Date: May 2006
Location: Charleston SC
Posts: 15,194
Total Cats: 1,687
Also skip the 949 radiator and mishimoto. Either buy the cheapest eBay all aluminum radiator, or save up and buy a TSE radiator. I have used well over several dozen eBay aluminum radiators without issues since 2008. The last one I purchased was like $104 shipped and dropped right out without issues.
#13
I do sell my setups without a turbo if you are seriously interested. Visa and Mastercard are you best friends.
Also skip the 949 radiator and mishimoto. Either buy the cheapest eBay all aluminum radiator, or save up and buy a TSE radiator. I have used well over several dozen eBay aluminum radiators without issues since 2008. The last one I purchased was like $104 shipped and dropped right out without issues.
Also skip the 949 radiator and mishimoto. Either buy the cheapest eBay all aluminum radiator, or save up and buy a TSE radiator. I have used well over several dozen eBay aluminum radiators without issues since 2008. The last one I purchased was like $104 shipped and dropped right out without issues.
#15
mkturbo.com
iTrader: (24)
Join Date: May 2006
Location: Charleston SC
Posts: 15,194
Total Cats: 1,687
I have not done back to back tests between the two. But I know Savington personally designed the TSE radiator to be track reliable in a boosted environment, where I feel Emilio more tends to design against a naturally aspirated track car. So to me its either go the cheapest route possible, or just man up and buy the best of the best. These are words I live by because in all my miata's I either have the cheapest Ebay radiator, or a TSE one.
#17
With an N/A build, it has enough spare capacity that airflow and ducting are less critical. Where high mass rads like the TSE shine is in less optimized systems like street cars with A/C and mostly stock front ends. Our Crossflow would not be happy in Acamas, Andrews 350whp pump gas burning street car with A/C and no hood vents.
__________________
Last edited by emilio700; 10-03-2017 at 09:20 PM. Reason: speling
#18
Running an SPM crossflow in Bullet, 220whp turbo. Stays below 200° even during races on warm days. William has one in his S1 and same results. The Crossflow is optimized for cars with good airflow, which Bullet has. If you have a 300whp turbo street car running pump gas with A/C, only OEM ducting, no hood vents or reroute, huge FMIC blocking the rad you need a mack truck sized rad to make up for the lack of airflow. In such a case its just thermal mass keeping your car from blowing up. A giant radiator cures many ills. The Crossflow is designed for a well setup cooling system, chopped up front end to increase airflow, lotsa hood vents, tight ducting to rad, FMIC set below or at bottom of rad, reroute, not too much antifreeze. In such a case, our high efficiency core works perfectly even with big power.
With an N/A build, it has enough spare capacity that airflow and ducting are less critical. Where high mass rads like the TSE shine is in less optimized systems like street cars with A/C and mostly stock front ends. Our Crossflow would not be happy in Acamas, Andrews 350whp pump gas burning street car with A/C and no hood vents.
With an N/A build, it has enough spare capacity that airflow and ducting are less critical. Where high mass rads like the TSE shine is in less optimized systems like street cars with A/C and mostly stock front ends. Our Crossflow would not be happy in Acamas, Andrews 350whp pump gas burning street car with A/C and no hood vents.
#20
Retired Mech Design Engr
iTrader: (3)
Join Date: Jan 2013
Location: Seneca, SC
Posts: 5,012
Total Cats: 859
Took it up a mountain yesterday with some sustained full power, uphill pulls. No worries.
So, I would expect 949 would as well. But like Emilio said, it may take some other efforts beyond just installing it.