Coolant Block-Off and Reroute Spacer // EGR Block-Off // EGR Block-Off with FPR Mount
#184
Still loving my parts, think I'm going to pull the trigger on that lower coolant hose piece here soon to make way for charge piping.
I hadn't checked this thread in a while but: wow, yah wish my spacer had been wider. I ended up having to diegrind satans nipple (which is just fun to type) boss so that I could get the hose clamp down far enough. I didn't really think much of it at the time. I had the transmission off the car at the time, so it was no big deal to do with the engine pivoted forward. Until I did that, I was not able to get the clamp low enough and had a small coolant leak when I pressure tested. Now I know it wasn't just me
I just beveled down that corner to get the clearance I needed, seemed to be a lot (well... enough... ) meat there.
You can see my original issue with this earlier in the thread, and why it leaked: https://www.miataturbo.net/miata-par...6/#post1389370
Edit, and for the record, I had the exact amount of clearance LownSlow616 did on my '94's head.
I hadn't checked this thread in a while but: wow, yah wish my spacer had been wider. I ended up having to diegrind satans nipple (which is just fun to type) boss so that I could get the hose clamp down far enough. I didn't really think much of it at the time. I had the transmission off the car at the time, so it was no big deal to do with the engine pivoted forward. Until I did that, I was not able to get the clamp low enough and had a small coolant leak when I pressure tested. Now I know it wasn't just me
I just beveled down that corner to get the clearance I needed, seemed to be a lot (well... enough... ) meat there.
You can see my original issue with this earlier in the thread, and why it leaked: https://www.miataturbo.net/miata-par...6/#post1389370
Edit, and for the record, I had the exact amount of clearance LownSlow616 did on my '94's head.
Last edited by Gimpster; 07-13-2017 at 10:03 AM.
#185
Thread Starter
Former Vendor
iTrader: (8)
Joined: Mar 2005
Posts: 1,185
Total Cats: 57
From: Broken Arrow,Ok
Thanks!
It was a battle of firewall room versus nipple room. I'm glad we were able to get the feedback and continue to make the product better.
We just recently got in the fittings that go along with the water pump inlet parts, so make sure you grab them if you're interested. They should be available on the site shortly.
It was a battle of firewall room versus nipple room. I'm glad we were able to get the feedback and continue to make the product better.
We just recently got in the fittings that go along with the water pump inlet parts, so make sure you grab them if you're interested. They should be available on the site shortly.
#186
So you will have a kit with the ORB fittings + hose posted on the site soon then? That would be nice...
Thanks!
It was a battle of firewall room versus nipple room. I'm glad we were able to get the feedback and continue to make the product better.
We just recently got in the fittings that go along with the water pump inlet parts, so make sure you grab them if you're interested. They should be available on the site shortly.
It was a battle of firewall room versus nipple room. I'm glad we were able to get the feedback and continue to make the product better.
We just recently got in the fittings that go along with the water pump inlet parts, so make sure you grab them if you're interested. They should be available on the site shortly.
#189
I haven't installed my reroute yet so i can't comment on that, but I can honestly say that Bandit has things down in the customer service department.
I honestly can't recommend him highly enough. Long story short, I bought the wrong parts. He took them back unused and swapped them for me for shipping. Thing is he did this months after purchase when he was well within his right not to.
Thanks again for helping my noob ***.
I honestly can't recommend him highly enough. Long story short, I bought the wrong parts. He took them back unused and swapped them for me for shipping. Thing is he did this months after purchase when he was well within his right not to.
Thanks again for helping my noob ***.
#190
Thread Starter
Former Vendor
iTrader: (8)
Joined: Mar 2005
Posts: 1,185
Total Cats: 57
From: Broken Arrow,Ok
I haven't installed my reroute yet so i can't comment on that, but I can honestly say that Bandit has things down in the customer service department.
I honestly can't recommend him highly enough. Long story short, I bought the wrong parts. He took them back unused and swapped them for me for shipping. Thing is he did this months after purchase when he was well within his right not to.
Thanks again for helping my noob ***.
I honestly can't recommend him highly enough. Long story short, I bought the wrong parts. He took them back unused and swapped them for me for shipping. Thing is he did this months after purchase when he was well within his right not to.
Thanks again for helping my noob ***.
We definitely aren't in the business of making dissatisfied customers with poor quality parts. Anything we can do to make the experience better, we try to accomodate.
Thanks for your continued business!