'94 MSPNP2 AC Problems
#1
'94 MSPNP2 AC Problems
Hello, I'm usually a lurker but I'm having a problem trying to make my air conditioning work with the help of AC Idle up. After enabling AC Idle up in Tuner Studio my car seems to activate idle up when the AC is not turned on, when AC is turned on the idle up stops and the car almost stalls. I'm not sure if this is just plain user error,if I am just looking at my problem incorrectly, or if its the ECU itself. The car is a drive train wise stock 1.8 94 on the base map (MSPNP2 1.3) . Any help is appreciated, thanks.
#4
Ok, I attached both. When the RPMs dip that's when I turn on the AC.
While the car is idling the little indicator box inside tunerstudio that says AC is lit up in green while it actually isn't on, and when it is on it turns gray like the rest. Is everybody else's like this?
#5
Retired Mech Design Engr
iTrader: (3)
Join Date: Jan 2013
Location: Seneca, SC
Posts: 5,012
Total Cats: 859
Settings should be Normal, not Inverted, and 440Hz, not 480; from what I can glean, not being expert in MS2 or NA8.
Regarding A/C control, I don't see any issues. However, yes, on my car A/C light goes green when A/C clutch is engaged.
That's all I can offer.
DNM
Regarding A/C control, I don't see any issues. However, yes, on my car A/C light goes green when A/C clutch is engaged.
That's all I can offer.
DNM
#9