1.6 Engine, ACT clutch, Link ECU, AEM Wideband, SuperMiata Damper, & Turbo Manifold
#1
1.6 Engine, ACT clutch, Link ECU, AEM Wideband, SuperMiata Damper, & Turbo Manifold
Everything Is sold!
First thing I have for sale is a 1.6 engine out of a 1993 Miata. The engine has approximately 110k miles on it and is setup for a turbo and comes with the oil drain setup with a flange for a T2 sized turbo. Also included is the AN fitting on the side of the block for an oil feed + the oil feed line. The engine has an ACT organic clutch and ACT lightweight flywheel that still has some life left. The fuel injectors on the engine are 440cc injectors with wired in resistors, and is pre-wired for sequential injection. The valve cover and intake manifold have been polished, and the intake manifold brace is still on the engine. The ECU is a Flyin' Miata Link for a 90-93 Miata. The Link works perfectly and comes with the keypad, knock sensor, IAT sensor, and serial to USB adapter. The link should still have the tune for a 1.6 with a Gt2560r and 440cc injectors on it. The turbo manifold is a log style T2 flange with a port for Exhaust Gas Temperature and comes with an Autometer EGT gauge. The manifold is tapped for M10x1.5 studs, but I do not have hardware for it, and one of the threads is slightly cross threaded. I also have a super miata damper that the clear coat was peeling, so the outer ring has surface rust, I'm sure someone could clean it up. Lastly, I have an AEM UEGO AFR gauge with O2 Sensor. Everything works and was pulled out of car ~1.5 months ago.
$450 $400 for Engine with injectors and feed/drain - Local pickup only
$350 $250 for Clutch and Flywheel
$250 $200 for Turbo Manifold with EGT Gauge
$200 for Link ECU with all sensors
$200 for Super Miata Damper - Sale Pending
$100 for AEM Wideband gauge + O2 Sensor - Sale Pending
Can do shipping to the Contiguous US or local pickup in Davenport, IA
Can do shipping to the Contiguous US or local pickup in Davenport, IA
Last edited by Docterhow; 11-02-2017 at 07:28 PM.
#7
Bumping thread, and lowering prices.
ACT Clutch with lightweight flywheel for $250
1.6 Turbo Manifold with EGT gauge for $200
-May consider selling a full 3 inch downpipe with manifold, PM me for details
Engine with 440cc injectors and feed/drain for $400
-Make offer on injectors if you are interested
ACT Clutch with lightweight flywheel for $250
1.6 Turbo Manifold with EGT gauge for $200
-May consider selling a full 3 inch downpipe with manifold, PM me for details
Engine with 440cc injectors and feed/drain for $400
-Make offer on injectors if you are interested