NB2 Turbo Redemption, or Just More Absurdity... Part Deux???
#88
Supporting Vendor
iTrader: (1)
Join Date: Sep 2010
Location: Lake Forest, CA
Posts: 7,991
Total Cats: 1,024
I'd probably sell my 2871R Absurdflow Vband hotside with intercooler and everything for $2500 plus shipping and paypal the week after Laguna Seca this year.
Ninja edit because I realized my first price was too cheap.
Ninja edit because I realized my first price was too cheap.
#90
Senior Member
Thread Starter
iTrader: (4)
Join Date: May 2010
Location: Dallas
Posts: 825
Total Cats: 68
Can anyone (Vlad?) explain if I have to do something with a jumper inside the ms case to use an external MAP? The instructions on trackspeed's site say there is a jumper, and Andrew has posted as such on here, but I saw Marcello and Vlad messing with an ms3 trying to add an external MAP and not doing anything inside the case.
#96
Senior Member
Thread Starter
iTrader: (4)
Join Date: May 2010
Location: Dallas
Posts: 825
Total Cats: 68
I think I am going to double down on the FM/2860 stuff and get the .64 housing. I have the GT500 injectors and IIRC, with 610cc at 43.5 psi they should be good to 310-330 whp depending on how far I want to push them since I am NB2 with 60 psi fuel pressure. I don't think it is financially prudent to go farther with my street car...yet.
Here is the VD with same as first few runs at the strip vs after I added 2 psi boost and roughly 1 degree of timing. I need to get on the dyno and get the fuel closer to 12:1 and add a LOT of timing in boost.
Here is the VD with same as first few runs at the strip vs after I added 2 psi boost and roughly 1 degree of timing. I need to get on the dyno and get the fuel closer to 12:1 and add a LOT of timing in boost.
#97
Senior Member
Thread Starter
iTrader: (4)
Join Date: May 2010
Location: Dallas
Posts: 825
Total Cats: 68
Can someone with more of a brain than me help me out with turbine housing part numbers?
I see on Garrett's site a GT2860R takes a p/n 827690-0005 for .64 a.r t25 housing.
On other sites, i see p/n 430609-0230 for the same t25 .64 housing.
Which is the right one?
I see on Garrett's site a GT2860R takes a p/n 827690-0005 for .64 a.r t25 housing.
On other sites, i see p/n 430609-0230 for the same t25 .64 housing.
Which is the right one?