Virtual Dyno says 400 hp?
#1
Elite Member
Thread Starter
iTrader: (1)
Join Date: Sep 2016
Location: Seattle
Posts: 1,859
Total Cats: 516
Virtual Dyno says 400 hp?
Setup is 90 miata with 1.8 diff
gt2860rs @13psi
3" exhaust from downpipe back
195/60-14 tires
im 180lbs and did the run this morning at 72f and a baro of 30
what am i missing here this is way to high
gt2860rs @13psi
3" exhaust from downpipe back
195/60-14 tires
im 180lbs and did the run this morning at 72f and a baro of 30
what am i missing here this is way to high
#4
Elite Member
Thread Starter
iTrader: (1)
Join Date: Sep 2016
Location: Seattle
Posts: 1,859
Total Cats: 516
did this one on my lunch break in 3rd gear. also changed the final drive to 3.9 and got way more realistic numbers. Even though 400 would be awesome on only 13psi
And both together
Blue is the 4th gear pull with corrected final drive and red is 3rd gear
And both together
Blue is the 4th gear pull with corrected final drive and red is 3rd gear
#10
Just for ***** & Giggle Ive plotted your plots against mine which are both 1.6's. But Mine is N/A
But have you noticed how the plot goes a bit whohooooo.....over 5000 rpm? when there is no smoothing applied?
I was thinking its my spring being old & worn out and running high lift cams.They just don't like it & have gone pair shape. Not necessarily jumping or anything just generally being toast.
but yours does the same thing. So maybe its nothing too be concerned about. could be just the software?
Other suggestions have been cam timing & My china Rx8 copy Ebay injectors
either way, Ive had a set of 65lbs springs sitting there which are going in this weekend . Will see how it goes
But have you noticed how the plot goes a bit whohooooo.....over 5000 rpm? when there is no smoothing applied?
I was thinking its my spring being old & worn out and running high lift cams.They just don't like it & have gone pair shape. Not necessarily jumping or anything just generally being toast.
but yours does the same thing. So maybe its nothing too be concerned about. could be just the software?
Other suggestions have been cam timing & My china Rx8 copy Ebay injectors
either way, Ive had a set of 65lbs springs sitting there which are going in this weekend . Will see how it goes