Wideband CAN module settings
#1
Cpt. Slow
Thread Starter
iTrader: (25)
Join Date: Oct 2005
Location: Oregon City, OR
Posts: 14,439
Total Cats: 1,214
Wideband CAN module settings
I'm trying to setup one of Rev's wideband modules with his MS3 basic, can someone spoon feed me the settings? I've followed the instructions including wiring and setup, but can't get it to communicate with the laptop.
#3
SADFab Destructive Testing Engineer
iTrader: (5)
Join Date: Apr 2014
Location: Beaverton, USA
Posts: 18,642
Total Cats: 1,866
If you are able to change settings on the wideband module then you are getting a connection. What is the AFR reporting?
You also need to change Fuel Settings->AFR/EGO Control-> EGO ports to CAN EGO.
You also need to change Fuel Settings->AFR/EGO Control-> EGO ports to CAN EGO.
#17
SADFab Destructive Testing Engineer
iTrader: (5)
Join Date: Apr 2014
Location: Beaverton, USA
Posts: 18,642
Total Cats: 1,866
This sounds like the same error @vteckiller2000 was having.
But he never fixed it.
You can use a utility called port scanner to test devices, and see what each CAN id is.
Megasquirt Support Forum (MSEXTRA) ? Port scanner (View topic)
But he never fixed it.
You can use a utility called port scanner to test devices, and see what each CAN id is.
Megasquirt Support Forum (MSEXTRA) ? Port scanner (View topic)