EFR6258 vs stock rods, round 1: DATSUN wins
#334
Senior Member
Thread Starter
iTrader: (2)
Join Date: Nov 2013
Location: Redlands, CA
Posts: 953
Total Cats: 41
Pretty. Having a panic attack that I have everything I need for this to work lol.
-clutch installed
-clutch pedal adjusted
-turbo manifold torqued
-exhaust mounted / torqued
-oil feed adapter -> 4an -> turbo
-oil pan drilled 3/8npt
-oil drain adapter with JBWELD
-oil drain line 10an + adapter
-install modified mixing manifold, find new radiator hose, some kind of AutoZone part
-water lines adapted to mixing manifold 5/16"
-bov with vacuum source (cruise control)
-intercooler piping, maybe an elbow
-ensure overboost is set up to ~8psi
-load up turbo with oil BEFORE START
-run low boost wastegate of ~5psi
-clutch installed
-clutch pedal adjusted
-turbo manifold torqued
-exhaust mounted / torqued
-oil feed adapter -> 4an -> turbo
-oil pan drilled 3/8npt
-oil drain adapter with JBWELD
-oil drain line 10an + adapter
-install modified mixing manifold, find new radiator hose, some kind of AutoZone part
-water lines adapted to mixing manifold 5/16"
-bov with vacuum source (cruise control)
-intercooler piping, maybe an elbow
-ensure overboost is set up to ~8psi
-load up turbo with oil BEFORE START
-run low boost wastegate of ~5psi