Cleaning House Wilwood Fuelab and more!
#1
Cleaning House Wilwood Fuelab and more!
Starting to clean up some of the stuff I am not going to use. I may be leaving the miata world unfortunately, so there may be a complete part out of my car in the near future.
Fuelab 535 series mini regulator. It is in good shape with the exception that it is missing the adjustment screw/nut. You should be able to get one pretty reasonable from Fuelab. $SOLD!!
Sun-Visor LED's. IIRC These are from Jass Performance. They will come with the wiring and resistor. I did install them with insulated spade terminals for easier removal if needed. However, during removal one of the spades came off. They are pretty cheap, or you can just solder the wires on your install. $50 shipped
Hardtop Brackets. I believe these are from RennenMetal, and are pretty hard to find now. This is both the front and the side brackets. $SOLD!
Wilwood compact master cylinder and mount. I was going to run manual brakes on my car but never got around to it. I bought this back in January. It will come with the adapter plate, as well as the clevis. This is the same master used in Fab9's kit as well. $SOLDshipped
All prices are shipped in the lower 48. If you have any questions feel free to ask.
Fuelab 535 series mini regulator. It is in good shape with the exception that it is missing the adjustment screw/nut. You should be able to get one pretty reasonable from Fuelab. $SOLD!!
Sun-Visor LED's. IIRC These are from Jass Performance. They will come with the wiring and resistor. I did install them with insulated spade terminals for easier removal if needed. However, during removal one of the spades came off. They are pretty cheap, or you can just solder the wires on your install. $50 shipped
Hardtop Brackets. I believe these are from RennenMetal, and are pretty hard to find now. This is both the front and the side brackets. $SOLD!
Wilwood compact master cylinder and mount. I was going to run manual brakes on my car but never got around to it. I bought this back in January. It will come with the adapter plate, as well as the clevis. This is the same master used in Fab9's kit as well. $SOLDshipped
All prices are shipped in the lower 48. If you have any questions feel free to ask.
Last edited by ricerscott; 05-09-2017 at 04:25 AM.