Dynapros Bridge Bolt
#1
SADFab Destructive Testing Engineer
Thread Starter
iTrader: (5)
Join Date: Apr 2014
Location: Beaverton, USA
Posts: 18,642
Total Cats: 1,866
Dynapros Bridge Bolt
Does anyone have a pair of superlites and dynapros sitting around (paging @Savington and @OGRacing). Are the bridge bolts interchangeable? I found a bridge bolt kit for the superlites that looks like it should fit a dynapros just fine but if someone could confirm that would be awesome.
#2
We don't have any *****-wood stuff laying around. i can refer you to V8 roadsters.. i know they use those calipers a lot. or Savington might have some.
__________________
OG Racing
Your Source For Motorsports Safety Equipment
WWW.OGRACING.COM
800.934.9112
703.430.3303
info@ogracing.com
OG Racing
Your Source For Motorsports Safety Equipment
WWW.OGRACING.COM
800.934.9112
703.430.3303
info@ogracing.com
#3
SADFab Destructive Testing Engineer
Thread Starter
iTrader: (5)
Join Date: Apr 2014
Location: Beaverton, USA
Posts: 18,642
Total Cats: 1,866
According to: Wilwood High Performance Disc Brakes - Caliper Product Number: 120-9693-SI
The wilwood bridge bolt kit: 230-10118 can be retrofitted to all DynaPro calipers.
The wilwood bridge bolt kit: 230-10118 can be retrofitted to all DynaPro calipers.
#6
Former Vendor
iTrader: (31)
Join Date: Nov 2006
Location: Sunnyvale, CA
Posts: 15,442
Total Cats: 2,104
Doubt it. The lug calipers are 12mm pad, radials are 16mm pad. The bolt is almost certainly different. The Superlite is a 20mm pad, so different again. The Superlite comes standard with a bridge bolt.
#8
I installed them on my TSE BBK (with Dynapros) at M@MRLS during a pad change. They improve pedal feel and modulation, IMO. Very inexpensive upgrade, although they make pad changes a bit of a PITA, as there's no notch to locate them properly and there's some trial-and-error required in order to line them up so the bolt will thread properly at the far side.
Thread
Thread Starter
Forum
Replies
Last Post