When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.
This is still in my car, but i figured I'd get it started to get some interest going since I will be ready to remove this from my car this upcoming week.
Included in this sale:
T3 Log Manifold
T3 "Smaller" Turbo with 2.5" v-band outlet (view dyno sheets in my build thread. made 230/??)
T3 "Bigger" Turbo with 2.5" v-band outlet (view dyno sheets in my build thread. made 230/245)
2.5" to 3" downpipe with v-bands at either end
-4an feed line and replacement restrictors
-8an drain line, a tee block(TSE) and fittings to bolt in at the oil pressure sender port on the block, drain fitting for the oil pan, and the input and outputs for the turbo (extra fittings with restrictor integrated included.)
Things you might need to source.
EGR Block off plates
3" Vband Midpipe and exhaust, I'm sure a competent shop can do this, Or you can try your luck with Lars!
Okay, finally ready to get rid of the setup, i just took it off the car today. Pics attached. Everything you see you get I will include the coupler off the turbo but no pipe (and additional things like the mid turbo included)
Also Included but not pictured :
-4an feed line and replacement restrictors, a tee block(TSE) and fittings to bolt in at the oil pressure sender port on the block, drain fitting for the oil pan, and the input and outputs for the turbo (extra fittings with restrictor integrated included.)
Things you might need to source.
New nuts for turbo to manifold connection m10x1.5
EGR Block off plates
3" Vband Midpipe and exhaust, I'm sure a competent shop can do this, Or you can try your luck with Lars!