Aidan's loose oily bunghole actually runs a track lap
#8925
Did you include the 1.0uF capacitor on the switched 12V terminal and 0.001uF capacitor between the ECU's 5V and GND terminals and to Signal GND, as shown below (fromMegaManual)?
Mine are configured in Wasted Spark mode; I've got a 0.470uF capacitor on the 12V switched terminal since it was the largest I could find but no 0.001uF capacitors.
It works fine but I'm considering shortening the harness and making the harness is easier if the capacitors aren't REALLY needed.
Black rivets looks much better, standard rivets make the car look "unfinished".
Going for the "Goth Look"?
(or should that be the "EMO Look" given that the car's red)
Mine are configured in Wasted Spark mode; I've got a 0.470uF capacitor on the 12V switched terminal since it was the largest I could find but no 0.001uF capacitors.
It works fine but I'm considering shortening the harness and making the harness is easier if the capacitors aren't REALLY needed.
(or should that be the "EMO Look" given that the car's red)