1.6 turbo mock up pics
#13
i would rather take a little extra time and not have boost control issues later. others have done this but the results won't necessarily be the same depending on turbine size and housing...
here are the specs on the turbo:
T3 Internal wastegate COM.42 A/R 45 Trim.48A/R
- 2.37" Inlet Diameter
- 2.28" Outlet Diameter
- Wet Floating Bearing
- T3 Flange
- Oil Inlet M12X1.5
- Compressor Wheel
- Ind: 1.67"
- Exd:2.37"
- Turbiner Wheel
- 4-Bolt Standard Hot Side
- Ind: 2.52"
- Exd: 1.82"
#14
mkturbo.com
iTrader: (24)
Join Date: May 2006
Location: Charleston SC
Posts: 15,194
Total Cats: 1,687
not insisting, inquiring.
i would rather take a little extra time and not have boost control issues later. others have done this but the results won't necessarily be the same depending on turbine size and housing...
here are the specs on the turbo:
T3 Internal wastegate COM.42 A/R 45 Trim.48A/R
i would rather take a little extra time and not have boost control issues later. others have done this but the results won't necessarily be the same depending on turbine size and housing...
here are the specs on the turbo:
T3 Internal wastegate COM.42 A/R 45 Trim.48A/R
- 2.37" Inlet Diameter
- 2.28" Outlet Diameter
- Wet Floating Bearing
- T3 Flange
- Oil Inlet M12X1.5
- Compressor Wheel
- Ind: 1.67"
- Exd:2.37"
- Turbiner Wheel
- 4-Bolt Standard Hot Side
- Ind: 2.52"
- Exd: 1.82"