MFactory upgraded gearsets
03-23-2017 | 10:53 AM
#201
lol y'all acting like it would be a bad thing if they kept making them. who cares? those that want/need a 3.3 are getting a killer part that was deemed a myth just a few months to a year ago, this is really cool. And I'd be surprised if MF didn't see the demand these have and started pursuing making more, as well as more trans stuff for Miata's. It's probably the only weak link left on turbo'd miatas.
Heck, I bet already most of the other companies have offered to sell their stuff and be their distributor, or do another run of these in the future
(that's the only reason this thread hasn't been flagged repeatedly for "non vendor" by now
)
...But seriously MF: y'all gonna have to become a vendor if this keeps going.
Heck, I bet already most of the other companies have offered to sell their stuff and be their distributor, or do another run of these in the future
(that's the only reason this thread hasn't been flagged repeatedly for "non vendor" by now
)...But seriously MF: y'all gonna have to become a vendor if this keeps going.
There is also the issue that speedo will be off, I don't think Mazda ever made a 3.3 speedo sensor. So that is something else that will have to be dealt with.
Reply
0
0
03-23-2017 | 10:59 AM
#202
Junior Member
Joined: Aug 2015
Posts: 449
Total Cats: 28
From: Boston,Mass
My soul hurts to see these go, i was going to purchase them tomorrow :( It would be great and a good thing if they kept making them, I missed out and so did many others did i am sure.
Lets hope MFMike comes in and says production will continue, otherwise i see a 3.63 in my future
Lets hope MFMike comes in and says production will continue, otherwise i see a 3.63 in my future
Reply
0
0
03-23-2017 | 11:00 AM
#203
While there is demand, I don't think it is high enough for MFMike to make more. 30 people to get another batch made is a bit large, especially if you are trying to get them all to coordinate and pay up front. Not impossible, but highly unlikely. So while I could see them selling 30 more, it would probably take several years and I am doubtful they want to sit on them for that long.
There is also the issue that speedo will be off, I don't think Mazda ever made a 3.3 speedo sensor. So that is something else that will have to be dealt with.
There is also the issue that speedo will be off, I don't think Mazda ever made a 3.3 speedo sensor. So that is something else that will have to be dealt with.
Oh well, who cares, doesn't matter now
Reply
0
0
03-23-2017 | 11:07 AM
#204
Newb
Joined: Mar 2017
Posts: 22
Total Cats: -18
From: North Carolina
The only reason these sold is because they may not be available anymore. Its like a Catch 22. If you stock them everybody waits and nobody buys them and they sit on them. I see it from both point of views. But everybody talks about spending money. But most don't ever do it.
Reply
0
0
03-23-2017 | 11:13 AM
#205
I don't think you've been around long enough to make an incorrect observation like that. Maybe on ricer sites like CR that's how it works, but here the people that race are usually the people that have money, and spend more of it on a monthly basis than some of the stance retards spend in a year.
Sure the majority of the community is poor/broke/cheap, but let's not ASSume
Sure the majority of the community is poor/broke/cheap, but let's not ASSume
Reply
0
0
03-23-2017 | 11:20 AM
#206
I don't believe what he said either. There is a large population of cars and the need is evidenced by how quickly these sold once discovered. A lot of us wouldn't be as likely to contribute money up front to a pie-in-the-sky, hope we can get a product that doesn't exist group buy as we would make a direct purchase from a supplying vendor for a real item in stock. I don't trust GB's for items that don't exist yet.
Regarding the speedo gear issue, I had a custom gauge face made by Revlimiter to match the change from 4.10 gears to 3.63 gears. It was not expensive. He could easily scale it for 3.3 gears in the same way. Problem solved.
Regarding the speedo gear issue, I had a custom gauge face made by Revlimiter to match the change from 4.10 gears to 3.63 gears. It was not expensive. He could easily scale it for 3.3 gears in the same way. Problem solved.
Reply
0
0
03-23-2017 | 11:31 AM
#207
I use one of these on one of my motorcycles to correct the speedo for gearing changes and to just get rid of the OEM "error" they always include. You can set them to anything. There are other similar things available. Guessing they would probably work for the non-mechanical Miata. Can you not adjust it through MS on the newer cars? Sorry that's probably a dumb question but I was thinking you could. I've not installed my MS3 yet.
https://www.healtech-electronics.com/products/sh/
https://www.healtech-electronics.com/products/sh/
Reply
0
0
03-23-2017 | 11:34 AM
#209
I use one of these on one of my motorcycles to correct the speedo for gearing changes and to just get rid of the OEM "error" they always include. You can set them to anything. There are other similar things available. Guessing they would probably work for the non-mechanical Miata. Can you not adjust it through MS on the newer cars? Sorry that's probably a dumb question but I was thinking you could. I've not installed my MS3 yet.
https://www.healtech-electronics.com/products/sh/
https://www.healtech-electronics.com/products/sh/
Reply
0
0
03-23-2017 | 11:35 AM
#210
Newb
Joined: Mar 2017
Posts: 22
Total Cats: -18
From: North Carolina
I don't think you've been around long enough to make an incorrect observation like that. Maybe on ricer sites like CR that's how it works, but here the people that race are usually the people that have money, and spend more of it on a monthly basis than some of the stance retards spend in a year.
Sure the majority of the community is poor/broke/cheap, but let's not ASSume
Sure the majority of the community is poor/broke/cheap, but let's not ASSume
Reply
0
0
03-23-2017 | 11:37 AM
#211
Think of it this way.
Would you rather buy vaporware that sounds awesome in theory or would you rather buy a reproducible part that has the blessing of folks that run this **** hard enough to form a solid opinion. Oh, the experience of the latter in this 'niche' industry doesn't hurt all that much either.
Look at how fast the 3.6's on the classifieds sell? It's gone within a few days at the most. Folks are much more willing to put down a deposit on something that is real and exists instead of something that sounds good with no proof of concept and a random person behind the wheel of the project.
Would you rather buy vaporware that sounds awesome in theory or would you rather buy a reproducible part that has the blessing of folks that run this **** hard enough to form a solid opinion. Oh, the experience of the latter in this 'niche' industry doesn't hurt all that much either.
Look at how fast the 3.6's on the classifieds sell? It's gone within a few days at the most. Folks are much more willing to put down a deposit on something that is real and exists instead of something that sounds good with no proof of concept and a random person behind the wheel of the project.
Reply
0
0
03-23-2017 | 11:44 AM
#213
Newb
Joined: Mar 2017
Posts: 22
Total Cats: -18
From: North Carolina
I mean we could go back and forth debating this all day. Maybe my opinion is right and maybe its wrong. In the end opinions dont matter though. I hope that these do get produced as more part choices is never a bad thing.
Reply
0
0
03-23-2017 | 12:05 PM
#214
Junior Member
Joined: Jun 2016
Posts: 147
Total Cats: 14
From: Dousman, WI
Maybe it's just me being an NA guy, but you all are sitting here salivating over 3.3:1 final drives, and I'm wondering if there's any off the shelf 5+:1 ring and pinions for less than Prather's cost for his run of 5.12:1s
Reply
0
0
03-23-2017 | 12:08 PM
#215
MM-MAZ04052028 - Maruha Motors ring & pinion gears - MiataRoadster - High-performance service...and parts for Roadsters
Not sure how that compares price wise.
Not sure how that compares price wise.
Reply
0
0
