The custom fabrication thread! (Post pics of stuff you have made)
#1161
Figure I would share this if anyone wants to 3d print one out.
https://www.thingiverse.com/thing:2181582
https://www.thingiverse.com/thing:2181582
#1165
A 3D printed wheel made of PLA seems like a waste of time and money to me. I guess if you have a YouTube channel devoted to "extreme" 3D printing projects for self-promotion or ad revenue it makes sense. But as an actual product it sucks. I wouldn't even use it on a garden tractor unless I was desperate. The material cannot withstand the temperatures of normal street use, let alone durability targets for things like fatigue life.
#1167
SadFab CEO
iTrader: (3)
Joined: Sep 2012
Posts: 4,560
Total Cats: 1,142
From: your mom's house phoenix, AZ
I think it was just to see if they could, im amazed it worked at all. PLA gets noodly by just siting in the sun here. In the summer time, itll turn to a puddle given a few hours. But ABS or even poly carb wouldn't be enough for a wheel IMO, so....
And the metal versions of 3D printing, to my knowledge, are still sintered (which has its inherent flaws too) and would probably be more expensive and less structural than a cast wheel of the same alloy.
And the metal versions of 3D printing, to my knowledge, are still sintered (which has its inherent flaws too) and would probably be more expensive and less structural than a cast wheel of the same alloy.
#1168
Boost Pope
iTrader: (8)
Joined: Sep 2005
Posts: 33,505
Total Cats: 6,906
From: Chicago. (The less-murder part.)
Other means of 3d printing metal exist, such as SLM, which NASA and Rocketdyne have been using lately to print functional rocket engine components, including highly-stressed stuff like thrust chambers. I'm certain you could print a wheel using this technique which was both stronger and lighter than any casting method. But it ain't cheap.
That having been said, I'm still waiting for any* consumer-level metal printing technology to come to market at a reasonable price. I will buy that immediately.
* = except that silly thing where a couple of guys mounted a MIG welding torch to an X-Y robot.
#1170
Boost Pope
iTrader: (8)
Joined: Sep 2005
Posts: 33,505
Total Cats: 6,906
From: Chicago. (The less-murder part.)
Not mine, but a fascinating series of videos. This dude manufactures a complete AR-15 lower, totally from scratch, with zero CNC. "From Scratch" in this case meaning that he actually cast the blank out of melted beer cans, and then worked from there.
Easily the most hard-core fabrication pr0n I've seen in a while.
Easily the most hard-core fabrication pr0n I've seen in a while.
#1172
Boost Pope
iTrader: (8)
Joined: Sep 2005
Posts: 33,505
Total Cats: 6,906
From: Chicago. (The less-murder part.)
Also, I just got approval today to build 12 more cameras. Nine will be robots, two stedicams, and one jib. Five of the robots will be basically the same as the last set, except I don't have budget to buy new pedestals for these. So I'll be inundating this thread in the months to come as we solve the challenges of integrating modern robotics with 1970s vintage pedestals. So very happy to have eMachineshop as a resource...
#1174
Removed the horrible downpipe from hell (worst thing I've ever seen in person fabrication wise) on my 200tdi swapped '73 Land Rover Series III with a buddy a few weeks back. We got partway through completely custom fabbing a new downpipe, had to adapt to the crappy exhaust so I could get home though. So we finished the initial part of it, from the current Vband it will then go forwards in full 2.5" and curve down into that tiny open space within the front fender/wing and back under the car.
Night and day driving difference from the completely choked/blocked off airflow downpipe and our hand cut plate/hand formed collector and pie cut downpipe work.
Night and day driving difference from the completely choked/blocked off airflow downpipe and our hand cut plate/hand formed collector and pie cut downpipe work.
#1176
Also, I just got approval today to build 12 more cameras. Nine will be robots, two stedicams, and one jib. Five of the robots will be basically the same as the last set, except I don't have budget to buy new pedestals for these. So I'll be inundating this thread in the months to come as we solve the challenges of integrating modern robotics with 1970s vintage pedestals. So very happy to have eMachineshop as a resource...
#1177
Boost Pope
iTrader: (8)
Joined: Sep 2005
Posts: 33,505
Total Cats: 6,906
From: Chicago. (The less-murder part.)
As to cost, yeah, they're more expensive than Fernando's Beauty Supply & Machine Shop if you're buying very small quantities. The difference being that Fernando doesn't build my stuff straight from a CAD file, and produce repeatable results every time. If I only need one or two of something, I'll hack it together myself. When I need dozens, and I need them all to work perfectly the first time, I use EMS.
I mean, you can't deny that these things are friggin' gorgeous:
60 of them (enough to do 30 monitors) cost me $634. At $21 a pair, that's less than an equivalent Chinese-made part on Amazon, whose dimensions I can't tailor to my specific need.
Every time I order CNC-milled aluminum from them, they're all like "Hey, don't you want to check out our anodizing or power-coating processes?" And I'm like "No, you dumb bot, tool-marks on raw aluminum are sexier than Tricia Helfer!"
If it's any condolence, I also fabricated some **** the old-fashioned way today.
Maybe not proper fab per se, just cutting rectangular holes into raised-floor tiles consisting of an inch of concrete sandwiched between two steel plates. Carbide-tipped tools ftw.
#1179
Boost Pope
iTrader: (8)
Joined: Sep 2005
Posts: 33,505
Total Cats: 6,906
From: Chicago. (The less-murder part.)
I'm extremely curious to hear the details of your negative experience with EMS.
I've used them to fabricate all sorts of random stuff, and every part I've gotten back has worked perfectly the first time.