TSE EFR NB2 Build Thread
#283
![Default](https://www.miataturbo.net/images/icons/icon1.gif)
So, kinda a stupid question but....can someone look at this log that I took and see if you see anything funky. Or even take a screenshot and post it here. For some reason I can't view any of my logs.
The one on the bottom is just my idle and the one on top is a 2nd through 4th pull I think. So....ya
The one on the bottom is just my idle and the one on top is a 2nd through 4th pull I think. So....ya
#292
Former Vendor
![](/mt2011/images_td/ranks/supporter1.gif)
iTrader: (31)
Join Date: Nov 2006
Location: Sunnyvale, CA
Posts: 15,442
Total Cats: 2,103
![Default](https://www.miataturbo.net/images/icons/icon1.gif)
Did I miss something? I see ~3% on the knock sensor, which is hardly knock. I look at all four cylinders on the same chart and look for single cylinders that suddenly spike higher. That's knock. If all four cylinders rise and fall together, that's normal noise that has to be filtered.
The top log definitely isn't a 2-3-4 pull, just some cruising around town. The bottom log is an idle oscillation caused by uneven VE settings in the fuel table.
The top log definitely isn't a 2-3-4 pull, just some cruising around town. The bottom log is an idle oscillation caused by uneven VE settings in the fuel table.
#294
![Default](https://www.miataturbo.net/images/icons/icon1.gif)
Did I miss something? I see ~3% on the knock sensor, which is hardly knock. I look at all four cylinders on the same chart and look for single cylinders that suddenly spike higher. That's knock. If all four cylinders rise and fall together, that's normal noise that has to be filtered.
The top log definitely isn't a 2-3-4 pull, just some cruising around town. The bottom log is an idle oscillation caused by uneven VE settings in the fuel table.
The top log definitely isn't a 2-3-4 pull, just some cruising around town. The bottom log is an idle oscillation caused by uneven VE settings in the fuel table.