TD04L-13T@21psi peak, someone please verify if im using virtualdyno correct
#1
Junior Member
Thread Starter
Join Date: Mar 2011
Location: Eindhoven, The netherlands
Posts: 197
Total Cats: 19
TD04L-13T@21psi peak, someone please verify if im using virtualdyno correct
Im using virtualdyno since i use Megasquirt, and every result i make with the same mods seems to be fairly the same.. But the figures seems high and hard to believe now the current mods and with this turbo
My engine is a 94 block with forged Wiseco and forged rods and all ARP bolts. stock 99/00 head and a custom intake manifold by my own design and a 2.75" downpipe and for the rest 3" straight trough exhaust and 3' catalytic converter
yes it was running pig rich so could pick some more power at that range
All in all the car is fast. a 50-75mph in 3rd gear only takes 2.1 sec and a 60-100mph in 4th gear only 4,3 sec
Here is the unsmoothed run, not huge spikes but some. Is this okay enough for a smooth run?
My engine is a 94 block with forged Wiseco and forged rods and all ARP bolts. stock 99/00 head and a custom intake manifold by my own design and a 2.75" downpipe and for the rest 3" straight trough exhaust and 3' catalytic converter
yes it was running pig rich so could pick some more power at that range
All in all the car is fast. a 50-75mph in 3rd gear only takes 2.1 sec and a 60-100mph in 4th gear only 4,3 sec
Here is the unsmoothed run, not huge spikes but some. Is this okay enough for a smooth run?
Last edited by Vincentmiata; 01-30-2017 at 08:34 PM.
#4
Junior Member
Thread Starter
Join Date: Mar 2011
Location: Eindhoven, The netherlands
Posts: 197
Total Cats: 19
I have uploaded the datalog and added to the first post
Its a 2000 NB 1.8 with 5speed and 4.1 diff. Apart from the motor the car is completely original so the weight should be around the same as stock
Its a 2000 NB 1.8 with 5speed and 4.1 diff. Apart from the motor the car is completely original so the weight should be around the same as stock
#10
Junior Member
Thread Starter
Join Date: Mar 2011
Location: Eindhoven, The netherlands
Posts: 197
Total Cats: 19
Im from the Netherlands. We dont have hills,
It was a level road, i used this road different times with other mods because it is around the corner. Also used some other level roads and comparing those 2 gives similar results
It was a level road, i used this road different times with other mods because it is around the corner. Also used some other level roads and comparing those 2 gives similar results
#12
Junior Member
Thread Starter
Join Date: Mar 2011
Location: Eindhoven, The netherlands
Posts: 197
Total Cats: 19
That would still be 275whp
Is there anyone 300whp with the same kinda datalog in 4th gear so i can compare those to? Or would that not be a good comparison? We can check different acceleration times from x mph to x mph
Is there anyone 300whp with the same kinda datalog in 4th gear so i can compare those to? Or would that not be a good comparison? We can check different acceleration times from x mph to x mph
#18
Junior Member
Thread Starter
Join Date: Mar 2011
Location: Eindhoven, The netherlands
Posts: 197
Total Cats: 19
thats 30 mph to almost 120mph in 8.3 sec in only using 4th gear.. kinda hard to believe with only 220whp
Last edited by Vincentmiata; 02-01-2017 at 09:39 AM.