Vibrant Flex Section
#1
Junior Member
Thread Starter
iTrader: (1)
Join Date: Jan 2016
Location: Indianapolis, IN
Posts: 242
Total Cats: 68
Vibrant Flex Section
Needed a flex section for the exhaust for my K24 project. Bought a Vibrant 6" that was listed as "Material: T304 Stainless Steel". As you can see below, I think that is a bit of a lie. The actual woven flex part seems fine, it's just the end caps that are the problem. Anyone else had issues like this with Vibrant? Went ahead and got a Stainless Works flex on order which actually gives the option of aluminized or stainless ends.
#3
Junior Member
Thread Starter
iTrader: (1)
Join Date: Jan 2016
Location: Indianapolis, IN
Posts: 242
Total Cats: 68
Based on research, it looks like 300 series stainless should at best become partially magnetic after being cold worked. This is definitely full magnetic. Good to know about the ends. The Stainless Works flex looks like it has better ends on it at least from the pictures.
#7
Junior Member
Thread Starter
iTrader: (1)
Join Date: Jan 2016
Location: Indianapolis, IN
Posts: 242
Total Cats: 68
Received the Stainless Works flex in and had the same issue. This one looked like it was possibly 409 stainless though and not mild like the Vibrant. Gave them a call and they checked their stock and it was all the same way. Going to go with the Vibrant bellows shlammed suggested instead.
#10
Junior Member
Thread Starter
iTrader: (1)
Join Date: Jan 2016
Location: Indianapolis, IN
Posts: 242
Total Cats: 68
They still haven't replied back to my email on Monday. I went with them first because they seem to be talked about quite a bit. Thanks for the heads up on Treadstone, they hadn't came up in my searching. Hopefully this new bellows will work. I'm not quite sure if a bellows accomplishes the same thing as a normal flex though.
#11
Junior Member
Thread Starter
iTrader: (1)
Join Date: Jan 2016
Location: Indianapolis, IN
Posts: 242
Total Cats: 68
Called Treadstone and asked them to verify their stock before ordering. Confirmed that they had the same issue and likely the same supplier. Received the Vibrant 68834 and it is definitely stainless and looks like a nice piece so I'll be going with that.